NYCO's '06 Boosted Blue Betty

Time for RIGID light bars to be mounted on the frame.

 

I have plans for most of them Not sure what color they are technically, bright white

One of the rolls, the first one I bought, wasn't water proof... so I had to buy the some more... I think I will use it to light up the interior under the dash. The rest are for rock lights, bed lights, hood lights and such.

I'll need 3 rolls huh?... I was planning on only needing two damn it... I may have to cut the two up and spread them out instead of running 1 solid strip.

 

I used these for slider lights, there water proof and just drilled a hole to install. No adhesive.

http://www.ebay.com/itm/2x-9W-LED-D...ackup-Parking-Signal-Light-Lamp-/370886048051

 

I have the vision-x tantrum rock lights, output is ok, good enough anyway. The strobe setting is cool tho, you can take the party with you wherever you go.

 

hey Bob,

friday the 28th i'll be in Denver, planning on checking out some breweries that night.. wynkoop and great divide and I'm not sure what else. then driving to CB saturday.

 

I have those -- on the remote which is strobe?? The directions were a but confusing with the remote...TIA!!!

 

And then there were two





Kit is from Outback Proven using piranha components.

Took damn near all day but it's up and running!

Big thanks to Jim, Eric, Dylan and Jace for the help and Phil for the delicious beer

 

Badass dude!

 

NICE!!! Glad to see you got it all finished!

 

Fuck yea. Been snowing since the new year. Should be awesome up there. Got a buddy from school who will be out that weekend too, maybe we'll head out for some drinks while you're in Denver.

 

thanks

it was a loooong day for sure...glad i didn't have to do it alone

 

Dual batteries FTW!

interesting location for the aux one

 

yea it was interesting getting the tray in there...

Outback proved instructions on the tray installation which was great. had to remove the power steering reservoir and relocate the hoses and reservoir to allow space for the battery. they give you a tray and new hoses. the reservoir mounts to the battery tray now.

it's definitely a tight fit. i still have room for a compressor now on the passenger side for when i get OBA

 

very slick and convenient. My dad will wish he could do that haha

 

Thats the tits!

 

new front suspension will be moving forward this week too...

once that is done, pretty much all the big projects are out of the way...

 

Sounds good.

Nice battery setup btw. Haven't seen that one before.

 

Sweet! I have a ton of stuff to get completed before I head West in few. I should be able to get everything done though. Nice job on the truck its come a long way from the last time I saw it first hand.

 

me either....searched the interwebz over and over and only found installed pics that were from SEMA 2012.

so we didn't have much to go off of besides the instructions that were based off the 2012.

swapping out the power steering hoses was a mess, but wasn't too bad.

working in that tight of a space up there was tough tho getting the bolts all in there..had to move my ballast around a couple times til we found a good spot that worked..the new hoses had to find a good route through everything...then the rest was a lot of wiring

i think i will throw some loom around the wires to hide them better and i still have to reattched the support i had on my winch solenoids..but all and all it came out pretty good.

still trying to figure out the features the isolator and monitor have.

http://www.piranhaoffroad.com.au/li...ent//product_guide_-_dual_battery_systems.pdf

DBE 140S management system

DBM4 Monitor

what else are you doing besides the front suspension rebuild?