BGR's build thread......

yea im guessing its the mounting holes for the brackets...

 

Okay another rear view camera question
I would like to add a switch to have camera on at anytime
Thoughts
do i need a spst on/off/on switch?
or just a spst on/off switch

Does this look okay

 

Oh mr x
2-1/8" correct

 

Next to the ash tray? Go figure...

 

is that what that is?
is just a pain in the ass to hook up cables out of there....
so they are going where the tape is on pic above
1 cig outlet and 1 double usb port
then i will install another for the usb plug on radio...

 

Ups guy said never give up
Wooot


+1 to who guess exactly whats in boxes

 

My sPOD has diodes for LED's

I can't wire shit like you can.....I'm taking the easy way out.

I see how it is. No invite for me until the party is almost over

29mm should work just fine.....or 1-3/16". USB is 1.12"........ might get away with 1-1/8" but it could be tight because it's only .005" larger than the USB

penis enlargement tubes? Dalton said you were hung like a school boy

 

INVITED ALL ON THE PLACE WE NO SPEAK ABOUT

DIODES HA.....
HMMM

YEA WILL TRY THE 1-3/16 AND USE DREMMIL IF NEEDED......


AND IF SOMEONE WOULD KNOW IT WOULD BE HIM......
LEAVING HIM A PRESENT RIGHT NOW

 

UPDATE
SOMEONE SEND ME MR X ADDRESS PLEASE

 

50 admiral Wilson Blvd Camden, NJ.

Come at me bro

 

PAY UP
http://parts.camelbacktoyota.com/pa...UMENT PANEL COMPONENTS&component=Center panel

 

So i drilled the holes today
Used an 1-1/8" bit
Worked perfectly
If my calculations are correct there should be little to no trimming of interior dash piece
I am still waiting on the double usb port to arrive so i can put the dash back together

 

Cvs

 

What kind of cvs

 

Rcv

 

I will pee my pants when they come in smaller than the holes you drilled.

 

yea i woulda waited lol..

but I guess he can use that stupid looking plate if the hole is too big.

 

Incorrect

I am like a surgeon
They said id have to cut the plastic mount behind the panel
Oh no i didnt

Time is of the essence
Wish it would come in already
Wish i could have found one in a store close by

Now if i could figure out how the metra face plate mounts id be in good shape

Needs new speakers and sub one day

So far i am lovin the bluetooth radio option
Need to learn how to do the pandora app next

Also dis the lock nod today
Dam everything on this truck has codes to change so freakin easy
Now my doors are not locked every freakin time i get out of the car
Wooot

Fixed all my dash lights

Need some good weather so i can finish wiring in the reverse cam
I cant wait for that

Then need blackout tint the rest of the windows

Then omg the list goes on and on and on

Gotta go pick up my wheels and tires this weekend
And my uca's - i might have to take them off the guys truck as part of the deal

Hope 16's will clear my calipers

 

SO TODAY i decided to change out my tensioner pulley and swap the belt and idler pulley due to crazy squeaking noises
ordered from rock auto last week had the parts sitting here
so i went for it....
removed the tensioner pulley and the new one was 1/2"-3/4" too small
fml




ok no problem i will take my bike to the store...oh wait i left my bike keys back at my apt.....
fml
put old belt back on..
drive to 3 stores to find one in stock
get it , put it on , put new belt on...
its a pita let me tell you, although i did get faster at it....
im bloddy, burnt, scraped up..

but shes on and no more screaming sounds

ok now lets mount the backup cam for good and run the wires
no problem...wait MAJOR PITA.....
HOLY CRAP WHAT DISASTER ...
mounted the camera..poped the plastic piece off and cut gromet got wires into tailgate all is well
go to run wires down tailgate...what a PITA.....
leave the rca plug on the end you say...ok i tried that....rca cable torn in half
again FML.....
get cables run into top of tailgate...now to get them through the last rubber sleeve and into the roof area.....again omg PITA....
ended up slicing the rubber boot right where the clip is and tapped it up after....
well i now have power and ground and whats left of the video rca cable into back roof area.......
called it quits today before i punch something or someone....
went out for a ride on my bike.....


was it worth it to save $150 idk....
im getting older and i think next time i will let the guy at the radio store tackle it....
and i am only half done
now i need to wire a switch into dash and run lines to front and pray she works......
my runner looks like a bomb exploded in it.....
i will never run any other lines to the tailgate ever

also ripped front skid off, took front tires off....
and well new calipers were installed not long ago....
new barkes in front, signs of new wheel bearings installed...
cv boots completly dry rotted, cracked, ghalf torn
sway bay bushings shot.....time for the saw zall
didnt get to the rears as i was done for the day...

 

Even chiltons is wrong