T4R is down! T4R Check In Here

Yeah, i have 4 relays double stick taped to my fender.

 

I need a positive bus bar for inside my center console that pulls from the fuse box. I have 4 add a fuse kits. its messy as fuck

 

That is what I did, check out my build for pics, but basically ran a + from the fuse to power all switch lights.

 

good lord. I only have two but they're self tapped into the fender neatly. I dont plan to add more but never know down the road.

Got a guy coming to grab my tires Saturday hopefully.

 

meh i dont see it?

 

It's actually on my 120 build page, not here.

http://www.toyota120.com/forum/showpost.php?p=156057&postcount=7

 

So for my main buss feed Should I run a 0g battery cable with a 100A fuse? Think I could plug in my 250w amp/sub my 240w light bar and a host of other shit to the blue seas?

 

damn man. thats exactly what I need to do. Gonna pick up a distribution block at home depot.

 

I ran separate feeds off the battery, one for the block and one for my amp, with a fuse to each, not shown in the 120 post, I will snap a pic of current setup tomorrow for ya. If I were to do it over again, and I will at some point, I would/will make a platform as many have for the fuse box rather than bolting it into the existing truck fuse box cover.

 

I do like how I did the relays though, out of the way and organized, but I am pretty much out of room if I needed to add anything else LOL. I guess I would just need to find another place to mount them.

 

Awesome, thanks dude. I was gonna just bolt it to the cover. I know my patience is wearing thin. I really need to do soemthing for the console when I bust it open to wire my reverse lights switch.

Whats that metal plate you have the distribution block that connetcs them all?

 

It is a jumper that came with the block, joining all the terminals so they are same polarity. Basically one side hot, the other to ground.

 

I also tapped that harness that is in the pic with the shifTer to make the switch light up when you turn the headlights on.

 

^Genius. Where did you find that block? I know they sell them at HD and lowes and stuff but i want that jumper thing with it too.

I will definitely have to do this for my 4 new ottratw switches for my winch and stuff

 

Rims mounted tomorrow. Stoked.

 

RadioShack I think. Not sure what that harness is supposed to be for, but there wasn't anything plugged into it, so I just used the multi meter to see which one turned hot with the headlights. If that one is in use, I am sure there are others in the truck you could find and tap.

 

yeh, i was just gonna tap the DAC light, i might ditch that switch altogether.

Problem is, I have CB, radar detector and GPS and stuff hard wired in there, I guess i'd just tap the fuse box for my main power there and another panel for lighting

 

Yup, that's exactly what I did.

 

Damn that looks good. Glad you finally gor them on.

Sweet! It's going to look badass!

 

6 pages of this and I've met maybe 6 of these people.