1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

No turn signal issue

Discussion in '2nd Gen. Tacomas (2005-2015)' started by anders99, Mar 3, 2014.

  1. Mar 3, 2014 at 2:38 PM
    #1
    anders99

    anders99 [OP] The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    I replaced my tai lights with some aftermarket LED ones a year ago. Today I had to do it again because some of the LEDs went out and Amazon sent me a new pair of the same exact kind all plug and play. When I went to test them no turn signals. Front or back. I only touched the rear end today. What could be my problem?

    I did search but couldn't find anything
     
  2. Mar 3, 2014 at 2:51 PM
    #2
    anders99

    anders99 [OP] The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    Just checked the fuses none are blown. The brake lights and running lights in the rear also work just no turn signals.
     
  3. Mar 3, 2014 at 2:55 PM
    #3
    coffeesnob

    coffeesnob Well-Known Member

    Joined:
    Feb 7, 2010
    Member:
    #30892
    Messages:
    8,791
    Gender:
    Male
    VA
    Vehicle:
    2010 access 4 cyl 2 wd
    bad bulbs?
     
  4. Mar 3, 2014 at 2:58 PM
    #4
    anders99

    anders99 [OP] The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    Nope in the rear they are fresh leds and the front were working this morning I am starting to think it is the turn signal relay
     
  5. Mar 3, 2014 at 7:01 PM
    #5
    anders99

    anders99 [OP] The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    Heres an update: I had one of the plugs twisted so the positive was aligned with the negative. I now believe that it is the flasher relay that is toast
     
  6. Mar 3, 2014 at 7:25 PM
    #6
    moondeath

    moondeath Well-Known Member

    Joined:
    Jan 8, 2011
    Member:
    #48948
    Messages:
    5,838
    Gender:
    Male
    First Name:
    Chris
    Pa, Gardners
    Vehicle:
    2013 TRD Sport DCLB 4x4
    5100 @ 0” w/ 2.5” Eibach spring, 1.5" Icon Progressive 3 leaf + 1” block, Procomp Wheels, Grill Thin Lip (Custom Car Grills Mod), Access Tonneau Cover, Pop & Lock Tailgate Electronic Lock PL8521
    Have you tried disconnecting the rear lights and see if the fronts work. They would hyper flash, but you would know if it was the relay or not .
     
  7. Mar 3, 2014 at 7:33 PM
    #7
    anders99

    anders99 [OP] The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    I will try that tomorrow but I did hook up the old pair that worked and they didn't work when I tried again.
     
  8. Mar 3, 2014 at 7:36 PM
    #8
    magnetic11

    magnetic11 Well-Known Member

    Joined:
    Feb 7, 2012
    Member:
    #72357
    Messages:
    976
    First Name:
    Matt
    "some nuke plant"
    Vehicle:
    11 trd sport
    Fab fours front and rear bumpers, B.A.M.F. weld on rock sliders, softopper, removed mud flaps and D-Badged everything. Icon 2.5 Extended Travel coil-overs, Total Chaos upppers, 2.0 Icon extended travel shocks with the resi's and Dekar Leaf packs.
    Mine have done this before. It was after I installed my front bumper. I've checked all the wiring to make sure that there isn't a short. All I did was pull the fuse to check it and put it back in. They seemed to work after that.
     
  9. Mar 3, 2014 at 7:36 PM
    #9
    anders99

    anders99 [OP] The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    Was it the fuse behind the coin tray labeled "Tail"? I have brake lights and running lights just no turns front or back
     
  10. Mar 3, 2014 at 7:37 PM
    #10
    moondeath

    moondeath Well-Known Member

    Joined:
    Jan 8, 2011
    Member:
    #48948
    Messages:
    5,838
    Gender:
    Male
    First Name:
    Chris
    Pa, Gardners
    Vehicle:
    2013 TRD Sport DCLB 4x4
    5100 @ 0” w/ 2.5” Eibach spring, 1.5" Icon Progressive 3 leaf + 1” block, Procomp Wheels, Grill Thin Lip (Custom Car Grills Mod), Access Tonneau Cover, Pop & Lock Tailgate Electronic Lock PL8521
    Ah, well that's pretty much the same idea. You may have already looked, but did you check all the fuse boxes?
     
  11. Mar 3, 2014 at 7:38 PM
    #11
    anders99

    anders99 [OP] The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    Yep. I pulled a few behind the coin tray and a few under the hood.
     
  12. Mar 3, 2014 at 9:23 PM
    #12
    landphil

    landphil Fish are FOOD, not friends!

    Joined:
    Mar 3, 2011
    Member:
    #52290
    Messages:
    3,203
    Gender:
    Male
    BC, Canada
    Vehicle:
    RIP 2006 Tacoma DCSB
    Tundra 5.7 mod
    Do the hazard (4 way flasher) lights work?

    If you created a short accidently, most likely its a fuse blown. It should be labeled "signal "IIRC, possibly "turn", or "hazard", it's not the tail fuse for sure. I'm thinking its in the fuse box inder the hood for some reason, but check both.
     
  13. Mar 3, 2014 at 9:54 PM
    #13
    anders99

    anders99 [OP] The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    No the hazards don't work either. Thanks for the tip on the fuse names I will check those in the morning.

    EDIT: I looked at a diagram and there is a fuse labeled "trn-hzd" I did not check that one so thats where I will head tomorrow morning.
     
    Last edited: Mar 3, 2014
  14. Mar 4, 2014 at 8:13 AM
    #14
    anders99

    anders99 [OP] The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    Thanks Landphil, there was a fuse blown under the hood. All better now.
     
  15. Mar 4, 2014 at 5:27 PM
    #15
    landphil

    landphil Fish are FOOD, not friends!

    Joined:
    Mar 3, 2011
    Member:
    #52290
    Messages:
    3,203
    Gender:
    Male
    BC, Canada
    Vehicle:
    RIP 2006 Tacoma DCSB
    Tundra 5.7 mod
    Yahoo!:cool:
     

Products Discussed in

To Top