Bilstein 5100 Poll

Mine are at 0 with the eibachs and I'm starting to get a slight vibe. Nothing terrible though.

 

My thoughts if you choose to go this route check this out:http://www.headstrongoffroad.com/headstrong-kits-tacoma-05-6-lug.html

BUT, I think you should go with a 3-leaf progressive add a leaf like this one from wheelers:

 

Before and after. 5100's all the way around. Front's set at 1.75". 265/75/16 duratracs. Also the measurements from Ground to fender are 37" all around.

 

1.75 no probs

 

Does the OME trim packer fit on the bilstein 5100s up front?

 

No

 

Thanks, wasn't sure

 

Only works with OME shocks

 

Yeah, may end up using 1/4" spacers for a little extra lift, still deciding. Thanks for your help on many questions,

 

this^

 

1.75 with 1.5" 3-leaf progressive and no vibes.

 

No vibes a couple years in.

 

Yeah, headstrong link is same, but less money, different add a leaf manufacturer probably. Before you make a lift purchase try and read a lot on here and maybe make a post for help with everything you need, but I'd try and read up on suspension stuff first.

 

Thanks. I'm reading, just not really comprehending. I learn about this stuff better if I can see them, more hands on.

Later.

 

I would love to see more of what people have theirs set on when running the OME 885 coils and what size tires running also. I am going to pull the trigger on the kit from Headstrong later today.

 

Hmm, im running on the .85 clip with OME springs and top 1/4" spacers, no issues here. Granted im still only running the 2"aal in the rear. I plan to pick up the Dakar for 3" later this year.

 

Im running OME's on the .85 clip on the billies, with 1/4" top spacer. Tires are 285/75.16s Duratracs, on the FJTT wheels with wheel spacer all the way arround. No wheel rub at all with normal driving. when 4 wheeling, the tires pretty much want to rip off the rear finders, 2"aal in rear. I actually have to remove them to go 4 wheeling.

Added a Body Lift and that pretty much solved that issue, just need to get a new rear leaf pack.

 

About to have this exact set up. You have TSB leafs in the rear or stock 3 leaf pack?

 

Had them at 1.75'' with stock coils for a while, no problems. Then had them set at 0'' with OME 885 coils and the only problem I had was my sway bar hitting my coil seat during suspension compression. Fixed with sway bar relocation kit from Toytec.

Matt