AZ BS Thread 2.0

nice!!
do you have the option to having them add another tab?

do you know anyone running them?

 

Yes it will have a secondary tab and not many people even know of dirt king

 

#livensinglelife

 

nice!!

yeah i have barely heard of them. personally id wait for someone else to pick them up so your not the guinei (or however its spelt) pig.
seems like a great/cheap alternative to TC.

curious, why did you decide this route instead of LT? width?

 

You can gusset the stock spindle...

The TC Race lowers stock length have the secondary shock mount. TC also sells the upper bit to mount to the shock tower for the secondary. One of these day's I'm going to run a secondary Icon bypass shock on my truck since, well, I have the mount and why not.

As for hydro bumps... the TC Race lower at least specifically states DO NOT RUN hydro bumps on it. The strike pad is not designed for them and will damage it. Could probably modify them but... eh... if you're running by-passes anyway you don't really need hydro bumps to start with.

As for running anything on stock lower arms... that's death. I would NEVER run hydro bumps on a stock lower, or rely on it for anything honestly. Braced or not, the connection frame-side is extremely poorly designed and the little spot weld can snap and it will wrap off the bushing and collapse. Ask me how I know that

 

Cause race truck

 

I have coilovers, bumps, and bypasses it allows you to tune the bypasses more like shocks instead of forcing you to set them up like a bump. Much more effective

 

LSK sells stock lowers for $1,000. Just sayin

 

I know TCs new lowers allow you to run a hydro bump, coil over and bypass.

 

Yea, LSK does offer a lower for 800$ less and I even considered them until a fellow TW member told me about the issues he had with them having the shock mount installed incorrectly. The TC race series lowers do cost, but worth every penny IMO.

 

Ya. The reason they were built like that is because they we building them for a truck that was running hydro bumps and they needed to make room. Idk how bad it is though. Mine are great but then again they built it for my truck.

 

I know LSK has made a few mistakes building some of their earlier stuff but they always make it right. My friend got a bedcage done by them and it was a quarter inch off on one side. It was fine the way it was but when they heard that it was off, they cut it off and built him a new, better one for free.

That's when they were building stuff out of their garage.

 

I agree, I read the replies from LSK asking to help. The unfortunate part is that it was his shop doing the talking to LSK and it turned into finger pointing. In the end he just ended up cutting it all apart to go solid axle.

 

YEP!

 

Boston court found that taking photos and video up women's skirts is actually legal

 

Well, they are out in public display >.>

 

Oh thats going to end good. But on the bright side i guess there will be new nudity to watch on the internet

 

So I'm getting into the stock market very soon, hopefully I hit big!

 

For school?

 

Real life. I've already started at school. I was given 100k and we have a class leader board. I have made 20k in a month and number one in the class.