Let's see pics of your 2nd gen sr5 wheels.

I have the opportunity to get some 2nd gen sr5 wheels on lone when I upgrade to a 16" rim this summer, I know there's a few guys on TW that run them on their first gens. Hoping I can get some pics. Thanks.

 

http://imgur.com/EC2bg2G

Overall highly satisfied with these wheels. From a 2012 Tacoma.

 

They fit fine and everything?

 

Black powdercoat. They will fit, but offset is different

 

Here's my truck when I had 2nd gen wheels on it

 

Can anyone get me the backspacing? I have the old sr5 rims, and I believe it's a 4" back spacing, without flares the tires cleared the body by maybe an inch. I'm guessing I'll need spacers to do the same if I get these wheels?

 

These pix will show you what I went from....I did install .75" Bora spacers on the front BUT that was more for the width of the LT265/75 series tire jump.....the black wheels had 265/70 P series...

 

.75" spacers, I didn't even know you could get those. I think I would likely be going 1" or 1.25" to clear my flares by a little bit, get a slightly more aggressive looking stance.

 

Here's a couple of my '99. Bilstein 5100s + an AAL. 265/75/16 Duratracs.

 

That's perfect, I'll be running the same tires just a size bigger. Are you running any kind of spacer? I have the same flares and I want the rim to extend slightly past.

 

Well, I managed to screw the formatting of my pics up, now didn't I? I am *now* running 3/4 inch BORA spacers, which were not installed when those two pictures were taken. This is a really crappy pic that was taken of my steps, but also shows where the wheel/tire combo sits with the spacers installed. FWIW - I installed the spacers to minimize frame rub at full lock. It was just a bonus that it happened to make the pickup look a little better, too.

 

that's actually a really nice fit. I just bough my 1" spacers last night, so it should be just about perfect when I mount the rims. Thanks for the pics!