Bilstein 5100 Poll

Yeah, I'm more of a physical learner also, I'll try and pm you later with some good links.

 

interesting. Do you know the backspacing on those wheels? Mine have a 4.5 and I am wondering if I will be able to fit 285/70/17s with 5100s and 885 coils set at 0 with the 1.5 AAL (I have TSB) and LR UCAs I have searched high and low trying to find if this will work with no cab mount chop.

 

'13 AC 4x4
Bilsteins set at 1.75
No vibes

.

 

Just bought some bilsteins from headstrong offroad, have a deal goin on so you can get them for 305 shipped. Ends tonight I believe..said good until 3/7/14 code Bil5100

 

TSB leafs. With the TSB leafs my truck was 2 inches lower in the front factory. So when I added the 5100's at 1.75" it leveled it out nicely. If someone has the 3 leaf setup I would say go with .85 for the 5100's.

 

Yea, I like that look a lot. I'm going to install the billies at 1.75 but I have a non-TSB leaf pack. I'm on the hunt for a TSB leaf pack because I'm past the warranty for a new set. Just got to be patient enough for one to pop up.

 

They have 15mm offset. I have 0 rubbing issues up front, even with my pretty heavy 4 wheeling, but I am also set at .85 with the 885's. Depends on the 4 wheeling you do. Without the wheel spacers, I'd be rubbing.

 

Can anyone with them set at 1.75" with SR5 coils post before/after measurements?

 

Bump

 

2013 DCSB SR5 4x4.

These are center of wheel to fender measurements.

Before:

Front 20 1/4" both sides.

Rear 22" Both Sides


After:

Front 22" Both sides

Rear 22" Both Sides

 

Do you have the 4 leaf/TSB springs on the rear?

 

Yes

 

Thanks for info! However I plan to do 5100s at 1.75 with 1/4" top plate spacers, 1.5" aal in the rear

 

if i set my billies at 1.75 and have a 2" aal will that give me a level setting or slight rack