Fabtech, ProComp 6" lift or more. Pictures

Here's mine

 

Nice! And not a spec of dirt anywhere!

 

That means the mall parking lot is well kept. I Love that shit

 

Mine "appears" to be well cleaned. Looking underneath & in the engine bay is shocking....red clay stains everywhere.

 

I am official in love with Sas Truck holy geezes.

 

^ If only I had thousands extra to spend

 

Amen! Heim joints on the tie rod/ drag link....high quality stuff!

 

Yea.

 

The draw back to SAS with a high lift.....the drag link angles increase too much & drives like crap at freeway speeds. It wanders & tracks into road ruts real bad. I had this problem with my old Jeep.

 

Hey guys another mod I am working on during CO wait time part duex :/

I always hated the way the DB kits mangled the OE brake lines and the general crappy appearance of the OE set up. Just adding longer stainless hoses will get the job done but I was on a mission to really clean up the brake lines and hoses in the front and rear. I found Crown Performance Products here in San Diego they are the OE hose and line manufacturer for many of the top shock and brake brands and their customer service was friggin incredible. I brought my truck to them with a sketch of what I wanted to do and some measurements and they spent an hour with me creating this "kit".

Their hoses are much larger then the group buy hoses here on TW, the quality difference in the hoses and fitting is obvious.

If you want this exact kit you can call Crown directly, my truck sits at 8" in the front so my front hoses are longer than " normal " but seeing the routing of mine you can easily estimate the length you need simply jack up your truck and measure at full droop / full lock to determine max possible hose length.

The entire kit for front and rear with all fittings, brackets and clips was only 139.00 + tax. I am going back over there tomorrow to grab some more parts for the rear hose project and I will get an exact contact name for everyone if you are interested in doing the same. I will post a full DB hose / line clean up write up when I finish the rear end.

 

Sorry my iPad will not let me attach multiple photos here is a photo all the crap you eliminate in the front ***and I swear my pedal response is firmer too ! Starting at the top of the frame rail you remove the "L" fitting , the top short OE hard line, the OE soft line, the bottom OE hard line at the caliper and all OE and DB brackets associated with those parts. You simply install a new bracket on top of the frame the hose has a 90 degree fitting on the top end and another bracket on the back of your spindle and the fitting at the caliper is a bajo.

 

I did something similar for about 80$ and an hour's worth of work.

 

I now have copious amounts of semen on my work computer because of these pics Thanks bud....thanks alot.

 

I could eat out of my engine bay

 

Sorry just had to post jizz pictures.

 

Used the Mobilemileage app this weekend and ran a whole tank of gas....almost all highway.....17.1mpg. Fuck yeah!

 

That app is doing it wrong

 

GPS calculation is way better than trying to figure it out with my tripometer that is way off.

 

I asked my bank account yesterday how my gas mileage is. My bank account said "Fuck you Ross, Fuck you"!

Bank account is Very Very accurate

 

I average $90 a week or more in gas.