01Tac0ma Build

bahahahahaha i literally just laughed out loud.... awesome.


well sell some frkain sliders and bumpers and find a way to come out! maybe stop makin portapoopers!!!!!! its a freakin blast man....

 

That's the only portopooper ive made
Working on the bumpers and what not! Really need someone who is willing to go half in with me so its not so much strain on either of us. its something like $1200 in gas round trip for a week from what I figured up last time I was looking into it! I actually have a collection started for a trip out there in 2015 so at worst it waits till then!

 

Do you Still have eibachs on the front suspension? top plate spacers?

Or do you have something different?

 

Yup, still 5100's/eibachs. I have the toytec 1/4" spacer on the driver side once the suspension had around 10k on it to fix the taco lean. No diff drop

 

What do your axles look like without the diff drop?

 

Well it came out I believe sometime after the 1/4" spacer for taco lean and by that point everything was well broken in plus I have a decent amount of weight up front. they aren't bad, as mentioned Ive wheeled them forever with busted inner boots ill try to snag a pic when I get back to my truck. Its sitting at the shop waiting on parts to come in for the clutch, then im going wheeling!

 

Looks like your sliders did work in those last two pics!

 

No toob doors on
Get intimate with a boulder
Reck door skin

Go figure

Sweet pictures as always

 

haha thanks man! It was only a matter of time, both besides look the same so when SAS comes there may be tube bed in the works... Or just rock the stock bed till its completely gone haha

 

didn't even touch ): was hoping they would but oh well.. They took a good 1' drop earlier on with full weight of truck so can't complain too much. Its all part of the game

 

I can imagine you saying, "the beach is that way," while flexing...get it?

 

Finally got around to tearing my axle down.
Found a guy local with an already assembled brand new third with 4:88's & ordering all the internal bearings, seals etc soon while im building the new "not so mega to JLee's" truss.. then to order the crawl box and ill be on my way!

Pulled apart for new internals, Cut the old truss off... and cleaning it up!

 

So you putting 35's on it then?

 

cant wait to start cutting on this bish

 

35's for street and 37's trail.. that is once I save up to re gear the rear to 4:88 and also have the money for the tires but will run 35's first then save up for trail 37's.

Doing the truss now but ran out of plate so gotta get another sheet

You and i both!
Jason said hes got all the service kit stuff and another set of hubs so ill have spares, plus your diff for now on my current wheels.. just gotta order the crawlbox but at least can have the axle assembled and ready to go here soon hopefully

 

Finally completely cleaned and ready to truss!!

 

That is one good looking hunk of metal

 

Thanks man! Found all the tie rod ends, axle rebuild kit and associated parts to put this thing back together! Just waiting on steel man to bring me some plate so I can get the truss together and once its done ill be on my way! Gonna start pulling the front bumper and associated pieces this week hopefully so I can French the front hangers and at least have that done. probably pick up all the seals and such next week and the following week hopefully have the truss started and axle going back together to be ready for the truck! then just a matter of getting the pwr steering hose conversion stuff on its way and ill be ready to

 

are you going leaf springs or coils?