Long Travel BS Thread

I would assume you treat it like the painted sheet metal. Tape and prep the area so you don't get the remaining material scratched or damaged.

But you already broke the first rule of owning a glass'd truck. It should have been white to begin with.

 

I feel like the go fast crowd is a good place to come for this kind of advice.

My rear a-arm cross member filed for divorce today. Any ideas how to put the bitch back in its place?

 

I have 3.5° and 3.7° on my AllPro kit, if I didn't tow my crawler or DD I would have even more.

 

here is how i did mine. Worked pretty good really. With the sanding wheel to touch up the bottom half. hardly any fender now down by the bottom..ha

http://www.tacomaworld.com/forum/1s...ild-lt-expo-trail-rig-bs-308.html#post7965731

http://www.tacomaworld.com/forum/1s...ild-lt-expo-trail-rig-bs-314.html#post8006647

 

Leave that bitch and get a new younger one.

 

Weld the crack, then plate over it. And plate the other side while youre at it.

 

I set my caster to; +8° @ ride height & about +12° at bump and DD it quite a bit.

 

i got a question for all you guys running dual stand up spares on a second gen. Im putting my bumper on sunday, and i took a look under there and there is a lot to move! I know i need to pull the bumper, tailgate and hitch, cut the bed, but I'm wondering about the passenger side brake light lines. Where did you guys run those? Also, it looks like there is a metal support under the edge of the bed... do i remove that or do i cut through that? just trying to get my ducks in a line before i start. Let me find a pic of the bumper for you guys.

 

Here's the bumper.

 

Kyle i can try and help sunday and the brake light lines have plenty of play for movement

 

i think I'm going out to JD's place, he's going to help me rebuild jakes old shocks.

 

Zip tied to the bottom cross bar, that x member got cut in half for my application but temporarily, full boxes frame and new cross members will be done soon

 

Thanks man! So there is a metal brace (thin looking sheet metal) that runs the length of the lip of the bed, if you know what I'm talking about, did you just cut a section out or did you cut it all out?

 

Best pic I could get of what I'm talking about.

 

hey guys im looking for 2.5x10 coilovers with resis king fox saw radflo any major brand. if anyone sees some used ones for a good price shoot me a pm or text. work doesn't allow me to get online very much so the help would be appreciated. person who helps me track some down will get rewarded! also can charge shocks for you guys cheap (951)226-4771

 

Thanks. That's exactly what I was looking for. I'll try that tomorrow when my blood alcohol level returns to normal.

 

I think you're good right now

 

NAH! it'll turn out fine if you start now haha nothing could go wrong hahaha

 

All I know is you ain't drunk enough

 

Meh why not