What have you done to your Tacoma today? 1st Gen Edition

that's what I thought too

 

Some people have said that MOOG is terrible. I've been running MOOG upper ball joints for over 15,000 miles with no issues.

Will be buying MOOG lower ball joints and tie-rods soon as well.

 

I need some help here after a hour or so at speeds of 65 -70 highway when I get back into town and brake at a light or stop sign rpms drop to shit for split second almost stall the come back to normal anybody know whats up

 

Try cleaning your throttle body and mass air flow sensor.

 

thanks gonna try that tomorrow after I replace fuel pressure regulator on the wifes pos kia

 

Swapped out my 4.10 rear diff for a 4runner 4.30. It actually worked out better than swapping ring and pinion since when I got in there my locker actuator was disintegrated. I was disappointed in that. Now I have a working locker though. My speedometer is dead nuts accurate with 33" tires. Spot on. Then I cut off the bpv load arm and zip tied it up at full potential. I also rotated my tires and introduced the spare into the lineup. Finally I got primer and paint on my skids since it is finally above freezing around here.

 

Ryan,

Was your old truck an auto?

Ordered this part:



And it's a 30 tooth, and the one I pulled out of the transfer case is a 30 tooth.

 

Yes, it was an auto. I didn't see you were a manual. Sorry for my mistake.

 

First run with the supercharger. No problems! (Disregard the rigged vac line routing. I had to use scraps of hose I had laying around. I will be getting new hose tomorrow to clean it up)

View My Video

 

Removed the rear shocks, and disconnected the Ebrake cable from the drums in anticipation of replacing my leafs tomorrow.

 

35's on and ready to go..

 

sweet

 

What kind and size glass you running up front? If ya don't mind me asking

 

Glassworks 4.5 But I trimmed slightly to fit the 35's

 

Here is a better pic of the glassworks fenders.

 

How does it stuff? Hit anything?

 

Nope stuffs just fine. Tubbed it a few months ago so it would be ready for the 35's. it does touch the frame at full lock but I can live with that for now.

 

Mine does also but not bad at all.

 

Shit, I have 33s that rub the frame so you guys are doing pretty well.

 

Ha!!