Houston area (along with DB's not from Houston) BS thread

Lol thats kinda how I feel but if in some small way it helps me make a little bit more money then whatever I guess lol

 

Mornin'....

 

Hi!

 

'ello.

 

So if I want to level out my 2011 DC i just need 5100s?

Also what size tire can i run with a leveling kit?

 

Not sure if serious but..

yes, and 26/70/17, 265/75/16 without rubbing or 285/70/17, 285/75/16 with rubbing

 

haha, yes. I am new to Tacos and new to lifts. I have searched and most people were doing 5100s and aal but i don't need a major lift, just something leveled out.

 

That's one way. Gonna have to put some pre-load on the 5100's to bring them up to desired height. FYI: more pre-load = stiffer ride.

I think you can get away with a 285 but you're gonna have some rubbing.

 

So this would be the kit to get?

http://downsouthmotorsports.com/i-1...n-rcd-5100-ride-height-adjustable-shocks.html

 

Set your 5100s to .85 if you dont have an AAL. If you do or have the TSB done set it to 1.75

 

http://toyteclifts.3dcartstores.com...able-5100-front-and-rear-5100-shock_p_31.html

http://toyteclifts.3dcartstores.com/ToytecEibach-front-coil-lift-springs_p_14.html

 

Thanks, I don't NEED the front springs do I?

Also with a small lift like this will i need UCAs?

 

No need for uca

 

Mornin

 

uh I think you can use stock springs but I'm not sure. You may not need the UCA but its recommended.. you can always get LR UCAs from headstrong for like 375

 

If you want to save money, you can use your stock spring

 

Should have sold him all your stuff!

 

Morning sir!

 

I don't mind doing part by part i.e. get the 5100s on a stock spring installed, then sometime later get the springs and UCAs installed...

Just want to level out the truck a bit and put some wheels and tires under her.