Super White Tacoma Owners Unite!

​

 

That looks really clean. What make is the basket? What bar are you using for your lights? How wide are the lights?

 

Thanks

Yakima Load Warrior.

 

What bar are you using for your lights? How wide are the lights

 

N-Fab bar with 40" combo flood / spot LED. I originally bought a 30" when I ordered the N-Fab bar thinking it would be wide enough but it wasn't. The 40" fits perfectly and is bright enough to kill vampires.

 

As far as the bed system goes this is the best set up I've found for "me".

Yakima Load Warrior with 2 Waterproof "North Face" Duffle bags and 2 - 30GAL GSC waterproof boxes. Everything fits perfectly and you only have 4 things to take out of the truck when staying at a Hotel / Camping.
I can fit everything I need with this set up.










And just to prove the bags are waterproof here they are at elevation with air trapped inside.









​

 

I like this set up a lot. I'm adding a spare tire mount in my bed, if that doesn't work out I'm jacking your set up haha

 

It's not for everyone but it works out great for us. It is the best system I've come up with for storage, convenience, and practicality. I considered getting a shell but I don't have a place to store a utility trailer so this is the next best thing for me.

 

what kind of wheel setup is that ? looks nice!

 

I think it's awesome the only thing I'm going to change is make a wider basket then put a plate on the bottom drill holes on the sides so rain won't build up, up top then put a generator and a few other things that can't get wet underneath that upper trey. Then put those water proof bags up top. It's definitely a nice set up.

 

Thanks! 17x8.5 SCS Stealth 6 on 285/70 BFG KO.

 

If you decide on the bags I got them off of Sierra Trading Post for $129 each. They were on Amazon for a little over $200 each (which is still pretty cheap). I don't know how or why they were so cheap but I took advantage of it while I could.

 

My buddy is going to end up building me a front tube bumper and skid and a bolt on rear attached to the spare mount. Got a killer deal so I couldn't pass it up.

Good lookin though

 

Let my new lift settle a little. Man that add a leaf really jacked up the rear. Guess I am going to bite the bullet and get some UCA's

 

I'm not a huge fan of Cali lifts but I did a solid 2 7/8" I would guess haha in the rear and 3" in the front. It's not high but it's high enough to enjoy and go off-roading with good clearance

Deff get uca and go 3" if you like it

 

Here's mine:

 

I had no intention of it turning out like that lol. I figured 1.5 in the rear and the 1.6 in the front would keep the stock tsb rake haha

 

Here's mine you bearly can see the Cali lift which is awesome

 

That's exactly what I am after , very slight rake! More stuff to buy, good thing its the start to summer!

 

how did you clear the amber in the corners? Pull them apart?