Maxtrac Spindle Lift for 2nd Gen Prerunners

Okay, thanks for clearing that up

 

Is that 4 in over stock or just 4 in lift. That is the issue I keep having when I want to just say screw it and buy a leaf pack kit is I can't get the correct answers. My goal is to ditch blocks all together but being 6.5in the front need something to bring it level without sagging with a load in the rear. Just went and picked up mulch this weekend and squatted really bad. Even with the f250 leaf in it.

 

Since you are 6.5 in front if you want a lil rake you would have to add a small block to the expos or just order some custom Alcan's.

 

Alcans are much more expensive. Lol but worth it. But with the Daytona trip coming up I gotta keep it under the radar. I currently am running I f250 leaf and my normal 2 pack that the truck came with and a 1.5" block and am still sagging In the rear unloaded. I have two more f250 springs I could add but no guarantee they will give me anymore lift. The one gave me almost 3in then it settled.

 

With Expo's, if you don't run any weight in the back, you'll pull almost 5" of lift from day one of install. Once they settle (with a bit of weight in the bed) I'm almost perfectly level with my Maxtracs in the front.

I loaded up with a good 800lbs of brick in the bed last weekend, and I wasn't even on bumps yet . Was definitely hitting bumps pretty easily lol, but I was still a good 2" above bumps, had to bump up my compression on my shocks

 

Any hub to fender measurements from anyone with the Alpro Expos would be very helpful.

 

Search my build thread. If I remember correctly before settling they gave me 5 1/4" of lift.

 

Mine was 25 1/2'' with expo pack.

I have a little bro lean with maxtrac & 5100 @ 1.75..

It's an inch higher in the front.

 

You were at 25.5 hub to fender? That seems very low. I was at 25" with just a 2" AAL. Im at 27.2" now with the addition of a 2" block. I want a leaf pack that can keep me at 27" I wanna keep my stance and ditch the block.

 

Anyone got an extra set of 2in lift. Blocks I can use for r &r on my rear? I'll return them at my cost once I'm done should be a week or two at the most. Just want to see if it gives me a rake or not. I kinda want maybe a .5 rake in the rear so when I have something not too heavy in the bed it will sit level.

 

Damn I must of measured blind folded, I'll check again.

 

Who knows it could be possible

 

Vic, where's the pictures of them installed?

 

Im slackin dude I havent put em on yet...

 

I was going to ask this question in here but with over 3000 responses I figured it could possibly help someone in the future with this question in its own thread

http://www.tacomaworld.com/forum/2nd-gen-tacomas/324435-maxtrac-allignment-question.html

 

Finally finished up mine today maxtrac spindles up front with stock off road coils and struts and in the rear I have the ome nitro charger shocks and dakar leaf pack ill take measurements tommorow

 

Sweet! Interested in your measurements too. Thinking about buying that same bundle lift. Seems more practical and cheaper than buying everything separate. Looks leveled in your pic.

 

Yea in person the rear looks a tad higher maybe a half inch but I'll get proper measurements after work today

 

Took the Maxtracs off-roading. Pics to follow soon.