Who has good ears and a good idea

This is an awful sound that I have coming from the front of my 2007 Tacoma Access Cab V6 4x4.

I've got Icon 2.5 coil overs with 650# coils and Light Racing Upper Control Arms. Everything is aligned and tightened.

Tell me what this sound is

http://youtu.be/pjV65dmqArk

 

How much thread is showing on your coils?

 

I have the same coilovers but uniballs. Mine made a noise like that, but went mostly away after lubing the uniballs. I think there might be some coming from my leaf pack as well. Do you have aftermarket leafs/AAL?

 

I have the Icon AAL. My sounds is 100% coming from the front

 

Is this a new install?

 

Negative. About 10 months ago.

 

Have you checked the LR UCA bushings for binding?

 

Please explain.

 

http://www.tacomaworld.com/forum/suspension/208945-new-bushings-light-racing-ucas.html#post4708658

 

Mine makes the exact same sound but only sometimes, no clue

 

I just checked. I've got no play in the UCA or the ball joint. The bolt are tight and not over tightened. I'm wondering if I have enough grease in the ball joint itself.

 

I had a similar noise. It was my LR UCAs. I had to remove the old bushings and install the "spec ride" bushings.

Newer LR UCAs already come with those bushings installed.

 

I've got the Spec Ride bushings. I'm worried its my shock. I greased the lower mount today and that helped when going over bumps at slow speeds. But when I hit a speed bump above 30mph I get this sound.

 

you say you're cranked just a little but are any of the coils possibly rubbing on eachother? What about the top hat bushing have you greased that? It might pivot like the lower one when moving.

 

http://www.tacomaworld.com/forum/2nd-gen-tacomas/292775-fox-2-5-coilover-popping-sound-2.html

There were some options discussed in this thread. Watch the white truck video, sounds just like yours. Pm one of those people to see if they fixed it.

 

Lube the uniballs on the UCA with WD40 or Triflo something like that

 

it's not a Uniball, he's got ball joints.

Mitch I've listened to it a few times now and my thought has been lower ball joint every time I've watch it... Maybe get the needle fitting for your grease gun and add grease

 

I am referring to the uniballs if he has aftermarket UCA's

 

Do you have stock or aftermarket UCA?