Question about 33s with spacers

hey guys, im thinking about getting the ToyTec Ultimate lift and thinking about getting the toyo M/T(33x12.50x20) with some spacers.Do yall think it will work? Do yall think it will rubber on the UCAs? Did anyone ever had prolbems with spacers?

 

ok...how wide i would need to get them u think. and u think i b ok with getting them for the front only.

 

x2. I believe they only make 1.25". I have mine on all four just to make it even.

 

This is what I did. It looks nice. I don't have 33's, but the 31's look nice.


My next set of tires will be 33's.

 

here is my 2 pennies.
1. why go for 33s on 20" rims that really doesnt help you out if your need to air down for sidewall flex do to the fact that you wont have that much flex.
2. if you dont have the rims at the moment which im guessing you dont. buy rims that are like 20x8 with the least amount of backspacing you can.
3. your in a PreRunner so why are going to get MTs

 

I have a Prerunner and have BFG MT's. It depends on what you do. I have kept up with jeeps and 4x4's using my locker. It has to do with driver skill as well. Plus its more grip.

 

Who cares if he has a PreRunner and wants M/T's? I'm getting M/T's for my next tire because they are great tires off road and they look bad ass.

 

I go off roading only a few times, and it not nothing bad just ride around and the camp at night. and the rims i want i dont think it comes in an 20x8 only a 20x9. and i want the toyo mt b/c i like toyo and the design and i want something that willl last a while b/c i drive about 250 miles to go to work.

 

i have 305/70/16 (33/12/16)Spidertrax 1.25". get nothing but Spidertrax when it comes to spacers. it just gives you that "warm and fuzzy" that things will be ok.i used the rockcrawler rims off wheelersoffroad.com they have the correct backspacing you would need(type B). i used the spacer for added insurance that there wouldnt be a problem because craigtrd is not using them and has no problems but he is using a 10.50 width tire. get all 4 if youre gonna get them it will look wierd and "off" if you dont. crawler rims probably arent for you but i lightly sanded mine a bit and rustoleum hammered blacked them. pics are in my album.

 

33X12.5 with spacers on is going to require some major trimming. Rubbing UCA can be fixed with the right backspacing on the wheels, but I'd imagine you'll hit the Cab Mount and both fenders when you turn.

 

Thanks ill think about it more. my next plan was to get some 18s some 285/60/18 Nitto TG on some XD monsters.

 

That's what I was thinking, with no lift.

 

ill be get the 3'' toytec unilmate lift with the tires and rims.

 

I had those tires 33X12.50 Toyo mt's on 18's and had to trim a little. You should be ok.

 

Did you have spacers? Did u have just a 3'' lift or did u have what u have now a 3''lift with a 3'' body

 

so u think ill be ok if i decide to go with 33x12.50x20 with some spacers?