BIG ISLAND HI Thread

Not for a while then

 

http://youtu.be/sA-e5rbIJnI

switchbacks

http://youtu.be/FyhUtcyA7aE

stock vs led

 

anyone here interested in a 98 limited 4r or 04 4r? both high mileage….$15k for both for you TWers. not mine but my brothers.
or need a front bumper for a 98-00 taco, stock sway bar or SAW aftermarket bar for 05+, drivers tail for 95.5-00 taco, stock spindles for 95.5-04.
Also have 95-04 baja fenders I may sell and a project 97 4runner with sas stuff but wrecked front end. not sure on that since clear title and a good few months savings invested. also have another 98 limited 4runner for parts if anyone needs stuff.

that parts not gonna go on cl but these are. Soon I will be parting these...a 84 ex cab 4wd(actually just complete cab, bed, frame, interior), an 87 single cab 4wd(back tax since 2011, 4" ifs lift, I need motor, everything else there), a 88 single cab 4wd(almost complete cab, flat bed, stored plates, blown 3.0 good 5spd trans, no 3rd member but do have an extra rear end, no front bumper), and I have a complete, still running and legal 88 ex cab 4wd with a 3.0 I can't really get running right..but would be an awesome project for someone. I have a 3.4 in my parts 4runner id sell with this but not separate.
I basically have a bunch of things for 84-88 and i don't wanna but I may sell my 88 single cab that is straight front but I wanna try keep it. I need to move my stuff and no sense store it to forget about it if someone could use it.

 

If I had money those sound like fun projects

do what adam did, take an old toyota SFA and link it under a 1st gen taco...

 

money, time, and more tools! lol.
too bad I may not have much space anymore, but the space my stuff is taking up will go to better use. I already have a bunch of other projects as it is, so I'm not that worried getting rid of things. If you want a project, ill make u a killer deal.


ohhh and I would love to have a sfa 95.5up. Id love to keep my Runner as a project and I told my brother keep his 98. I got him a waggy 44 and was going to give him my standard trans and put a 3.0 trans behind my 3.4 and run a toyota axle. If I sold some things I could say its a step closer to buying what I need to link up my taco. As it is I wanna keep my fj40, but also have a 92 single cab on an 82 frame, but I have an 83 2wd with a good cab that could go on that frame and I was gonna put the 92 cab on the black single cab frame that I've been post in up on ig. And then straight front that truck too(but then again its amazing what kinda stuff I've done with that ifs). And then I have my 88 that I've had since 08 and would like to 3.4 or chevy motor that. Oh and if I put that 83 cab on the 82 frame thats another project to put together too, but I have everything id need to get that truck together.
and I also have a few nissan 720s and a few frontiers…I need to get rid of some of those too but I do have a 620 that I need to get back to working on. And then I have all those fords too. fkn a…too much things already,das y can get rid of some things.

 

http://www.tacomaworld.com/forum/1st-gen-builds/215854-4x4-wanna-part-2-sas-toyota-axle-3link.html

 

dude thats sick. i saw those on iJDMTOYS. was it hard to install? i have drls and i was thinking about swapping them to white leds but the switchback looks so much better.

 

For those ones you don't have to add a relay. For the ones I got, you do. It's a pain to get behind the fuse box inside the truck

Edit: the iJDMTOYS will most likely be the same

 

lawson try check this out: http://store.ijdmtoy.com/LED-Turn-Signal-Light-Rapid-Blink-Fix-Equalizers-p/aa1037.htm#1

if i splice the load resistors on i should be good to go right?

 

Just using the load resistors will probably make it amber only, like stock. It may need the relay just to make it with the steady white. And add a wire from the relay to the turn signal socket to make it white. That's how the csjumper2003 switchbacks are. I can post up the instructions for them so you can see how to wire it up

 

If I'm not mistake the vled v3 tritons are plug and play, so you wouldn't need a relay. But it's also expensive.

http://www.vleds.com/shop-bulb-numbers/1157-led/switchback.html

 

the switchbacks I wired up in my friend's truck had a power splice from the corner lead down into the switchback for the constant power

we wired in one of those resistors and it was good to go

 

It cut out with the blinkers too? Was it the vleds? Or a cheaper bulb? Csjumper ones needs a relay

 

it was super-high-end cheap ebay. lol


http://www.youtube.com/watch?v=_XnvRq1HbBM

 

I wonder if I even need a relay lol. Idk I just followed the instructions. I was gonna rewire mine to make it stay on with the headlights and without having to turn on the engine and pull the handbrake

 

anybody know any shops Hilo side to install a lift?

 

We do! Lol Hawaii campers

 

Top notch

 

Top notch

 

Was super easy. Its a plug and play kit. The only downside is the price. The build quality is solid, and its Bright. 600lm