How to remove badges to plasti dip?

I have a 2013 dcsb with chrome badges that I want to take off and plasti dip black

How do those come off?

Thanks!

Silver truck with black badges should look slick,
I'll post pix when I'm done

 

warm the badge up with a hair drier, or heat gun (but be VERY careful)

use dental floss and use it in a sawing action.

remove excess glue from badge and truck with (insert your preferred glue removal formula)

plastidip

put double sided foam tape on and cut out around lettering.

have a friend help you by standing back and letting you know if the badge is square and center. or use a sharpie and measure

Drink beer

 

Most just mask around them, spray, pull the masking, and clean up the painted areas with a toothpick.

 

I just tape a square around it and spray. The extra comes off pretty easy with a toothpick.

 

I did mine on the truck. Clean the area and the badge, dry, tape, spray, peel.

 

Thanks guys!

 

Get painters tape from the depot or most other places and mask it out.

 

painters tape and newspaper for the over spray!!

 

In progress

 

And if you don't like it, spray some rainx bug&tar remover on it and let it soak for 2 min and you can rinse it off with a garden hose...

 

After it sets up,
Will it stay on thru a car wash?

 

It should be just fine after a few days of curing. Maybe a wash right after would damage it if you were rough. I washed mine right after i dipped, just be gentle with the scrubbing action.

Ps i masked in the same exact way

 

I let mine cure for 2 days and I haven't had any problem at all.

 

10 coats lightly sprayed with 20 mins in between coats. Last coat start peeling at about 10 mins after spraying.





Finished product


















​

 

I did 3 light coats....

 

I plasti dipped my emblems and put the glossifier as well for the glossy look. Came out great! what do you guys think?

Planning on dipping or painting my front grill emblem white.

 

Look great!

 

cool!

 

Thanks guys! ... loving your Tacoma a lot!