Official Ultragauge Group Buy

Just ordered mine. Thanks a lot for the deal!

 

longtime lurker... first post.

Live in VA Beach, own a 2013 DC 4x4 TRD Sport (white). been learning a lot about products and modifications (nothing crazy) but researching products before purchasing. Thanks for the folks who put the time and effort on writing reviews, definitely helped me out on numerous purchases.

*anywho- purchased the UG w/ horizontal mount. Thanx for the OP for getting this going. Wish this type of information was displayed from the factory.
Matt-

 

To calibrate the ultraguage for larger or smaller than stock tires you need to do a distance calibration.

Calibrate Distance
MENU ->Vehicle Setup .. ->Calibration.. _-> Calibrate Distance
Use this menu item to calibrate all Distance Gauges. This calibration also directly affects the accuracy of all Speed, MPG and
DTE gauges. This calibration is especially necessary for vehicles which no longer have the stock wheels, tire sizes,
transmission, or rear-end differential.. This calibration will also compensate for inaccuracies in stock speed sensor and the
vehicle’s distance measurement system, as well as for tire wear.
To perform the distance calibration, reset the Trip Gauges and travel a known precise distance and then enter the known
distance. Often roads will have mile markers, but avoid roads that are not straight. Align the front end of the vehicle with a
mile marker, reset the Trip gauges, and then drive to the next mile marker, or to as many consecutive mile markets desired.
Generally more markers will improve accuracy. Stop the vehicle, aligning the front end to the final mile marker. Select
MENU -> Vehicle Setup .. -> Calibration.. ->Calibrate Distance, and change the value shown to the actual distance traveled.
When finished, press MENU to exit and permanently save the calibration. Once entered, UltraGauge will show the resulting
calibration factor at the bottom of the screen. Note that unplugging UltraGauge after calibration will not cause loss of
calibration.
Perform this Calibration prior to all other calibrations.
Note: Using the vehicle’s odometer to perform this calibration is pointless since the odometer and UltraGauge receive distance
information from the same source.

 

Great post Dylan

 

Got my plus mounted up with the windshield mount yesterday. Thanks for that post Dylan i didn't even think to recalibrate for larger tires. I'll do that today at some point.

 

still no word on a updated count.

 

LAST DAY TO GET YOUR ORDERS IN

 

bumpety bump bump

 

UG purchased, thanks for setting this up. Had no problems at all with putting my order in either.

 

just ordered mine..came out to $120 shipped..thanks for the GB fellas

got 2 UG and 2 horizontal mounts one for my '14 taco and one for my '11 scion xb

 

X2

 

Longtime lurker, first time poster. I'm gonna grab one. Hoping to start getting more involved in the community, starting now. Thanks for the group buy!

 

ok... i got this mess sorted out, and will try again tonight... paypal is a pain...

 

Last couple of hours. Get your orders in

 

Get it while you can guys. Never know when the next one is.

 

T-minus 3hours 15 minutes until end of GB. Get any last minute orders in NOW

 

considering getting one. reading around and basically it just tells you more about how your engine runs, tempature, mpg, ect right? what do most users use them for?

 

90% of people get them to monitor fuel economy. I got mine in a group buy over 8 months ago and i love it.

 

You can view and clear check engine lights and if you get the plus you can see what's your 0-60 time

 

Ordered EM Plus and Horizontal mount. Thanks OP!