TW Live

I need a tie down point at that end of the bed.

 

I didnt think about that. Thanks for the tip. Im thinking about just making a cut out circle pattern out of a sheet of paper so i dont have to remove them to paint.

 

Its a super handy spot probably for everyone. But for me especially because i have a toolbox in the back on the bed rails. Its nice to have a tie down point towards the front of the bed.

 

I did exactly that. I did tape a little close to it, then instead of taping paper or more tape I used a cut out, except used cardboard. Paper won't hold up with multiple uses with the paint.

 

They should be removed and the threads coated with anti seize periodically...unless you don't mind them seizing up. Mine were fubar after year three.

 

You're worried about black paint in a black truck bed?



I just sprayed with them in place.

Matt

 

What size torx bit are those?

 

Unless you get the correct gloss match, its gonna show. Even if you have to look close. I realize its a truck bed. Buy I like to do things neat, not sloppy.

 

Bed bolts are a T55. Sorry for the glare. You can get a whole set at Harbor Freight for $10.


Edit: you can see all the sizes in the set at the top written part.

 

SOS concepts sliders, thanks eddy!

 

T55, Thanks!!

 

Think they are on sale. At least the Hex drivers were. Picked up both SAE and Metric sets for $26.