Wyoming B.S. Thread

I do have monday off but i'm leaving for moab wed and working tues so i'd like to have monday to pack... idk, if it only works on monday for errbody else it can work for me i'll just get everything ready on saturday.

 

What time will you be rolling into Moab on Wednesday?

 

Just do what I do and pack the morning of.

 

6pm~ish When you arriving? earlier than wed?

 

uhhh, no haha. I seem to bring lots of shit everywhere i go... gonna take some planning to make sure i dont come up short on food/important stuff like beeeeeer!

 

I'll be there Wednesday as well. Probably between 3-4. Heading out of SD bout 3am. Might have to stop in Vegas to pick up RJ if he gets the time off

 

This for sure, if I wait til the last second ill forget so much stuff. Besides, taking your time and packing early makes for a good buzz, often several nights in a row......like tonighy

 

hahaha, that's how to pack, but i'd probably forget shit that way too... at least there's a pile to stare at for a day or so and remember what you forgot. And right on, if my shit is in a row i'll be there earlier, i'll be in touch when i roll in

 

How about Friday and Saturday?

Hopefully Frankenstein will be done with surgery by then

 

And maybe the FRV also

 

Alright, this is what was given to me from ecgs. To save a bit of money I would prefer to just use this for now and decide if I want a air switch later. All I need is the paintball tank regulator right?
Would I just cut the clip off the solenoid and extend the wiring to fit on the switch?

 

It's a 5 pole switch. Has its own power and grounds for the lights in it and then the switch for solenoid. It doesn't appear that the white clip will go into the switch or does it?

You'll need the paint ball can kit and regulator from the ox place. Then plumb air tubing to the arb solenoid where ever it winds up. That blue line goes to the brass nipple on the diff which I hope is capped right now.

Basic wiring and plumbing stuff.

 

Red Grade looks like it's good to go Gage! They must have literally just plowed in in the last day or so. I went up to the turnoff for the Little Goose trail before i decided to go back but it was clear up to that point. Trails are probably a different story but the main road is good so thats a start!

 

Shoulda gave me a ring dude! They were plowing it yesterday and told me it may be a bit. Thats where I was having issues haha. The plow just left a sheet of ice behind and the MTR's did not like that with the inclines . The maxtrax just shot out from the tires too.

 

No the clip won't fit which is why I figured I should just cut it off and attach it that way?

 

I know I was gonna! I wasn't expecting to make it up that far. My buddy told me he saw something on Facebook about a section of hill sliding off onto the road so I had to go check it out for myself. Turned out to be a nice little cruise! Maybe tomorrow we can head up there and check it out some more when I get off.

 

SOB.

The Yukon master install kit...doesn't have any correct shims for my diff. Wtf.

 

Are your parts from ECGS? If so, I bet as soon as you tell them the problem they'll overnight the parts. Still sucks though...

 

Yea it doesn't have any outer diff shims. They are closed now so doesn't matter