2014 Bluetooth Mic 4pin mini-plug Wiring? Pulled wires out...

Hey yall, accidently pulled the wires out of the little white 4pin mini plug of the bluetooth mic, while trying to take off the overhead console to hardwire my radar detector. Can someone take a picture of their plug so I can rewire it?

And also, anyone know of which wires are accessory hot so I can tap into for my radar data while I'm up here? Thanks yall!

 

You're in luck, I just removed my mic in order to install a aftermarket one for my new head unit. Here's a pic, sorry don't know which wire is the power though.

 

No no, that's absolutely exactly what I need, thank you sir! Once I get it back up, I'll be able to check with my multimeter, and I'll put up which are the ones to tap into incase it helps anyone else.

Thanks again!

 

And here's the accessory wires to tap into for 12v with key in the on position. Believe this is for the auto dim / compass that my base 2014 didn't come with. Thought to try and wire it into the microphone, but it's ran off 5v.

 

I just did the same thing. Warning to anyone that takes the mic cover off; it's really easy pull those wires out of the plug, so be careful.

 

Yes it is! But thanks to this thread, I was able to wire it back up! Thanks!