Tacoma Bed Light Kits

Currently my work area..
Hoping to come back to a place with a garage after the deployment.

 

These are the pictures where the wiring comes from the loom split just above the rear suspension, from here I ran the wires up to the rear pocket and installed the switch just inside. This also shows the excess shroud used to hide the corner wires.

Install was extremely easy and very good results.

 

Fixed!!

 

If you would like you can use the adhesive mounts to hold the loom tubing up.

 

yea, it was right side up on my laptop.....weird. I still have almost all of the adhesive strips left, I used 6 zip ties and had some heat shrink connectors from a boat project instead, just for weather purposes. All in all it was super simple and really painless. My pictures are not quite as crisp as Pete's but we did virtually the exact same thing it seems.

 

On my corners, I used the adhesive tie mount provied and doubled up about 2 inches of wire in the tubing so I could mount it flush with the rails. I'll post a pick in a little bit.

 

Here is how mine turned out.

 

That's the way to do it. Looks good. Where did you get those at?

 

I will have to work on touching that up today, I still all those sticky tabs left so it shouldn't be too much of an issue. But it'll be wet for awhile, today is a good test for water for this kit. It's pouring buckets down here in the city.

 

Thanks, I just used what was provided in the kit.

I recommend utilizing the sticky tab mounts to clean things up. That storm looks pretty nasty, should be here with in a couple hours.

 

Yea, it dropped half an inch in just about an hour this morning. Nice strong winds has the truck all over the road this morning.

 

Drive safe

 

OK so heres the members for the first group
Grey= who has made contact


Bengland25 (LB Kit/Rocker Switch)- shipped
1stgenpre (SB Kit/rocker Switch) - shipped
Pistol Pete( SB Kit/Rocker Switch)- Shipped
La0dog ( SB Kit/ Rocker Switch) - Shipped
Ucbearcat (SB Kit/ Mini Switch)- Shipped
Slcsez2000 (LB Kit/ Rocker Switch)- Shipped
Treyfaccone (LB Kit/ Rocker switch) - Shipped
TurboGT (LB lights only 2 kits)- Payment Pending
RiverRat (custom order)- Shipped

If any of you do not want a kit let me know so another member can get in on this group, also if any of you need to change anything please pm me.

List has been updated, new memebrs will be pm'd

A 3.3% tax has been added when invoices are sent to cover any and all paypal fees.

 

Any installs this weekend?

 

I WANT!!!!! PUT ME DOWN PLEASE!!

 

Like I've stated in previous posts. Kits will now be sold as first come first serve basis. I will not wait any more for responses from members.

 

I would be interested in something to put in the roof of my camper shell, like two strips end to end. However, its carpeted and Im not exactly sure how I would attach it. Would you be able to do something like that? If so, how much?

 

I am currently working on one for mine. Also testing an adhesive tape I use to see how it holds

 

Pleae keep me posted. Would be happy to be a test dummy.