How tall is the rear block on the pro comp 6 in lift for second gen yota?

Anyone know this?

No negativity please

Thanks!!!

 

My guess is 6 inches

 

Says here 2.5" block to give 3.5" lift

http://www.**************.com/index...a_vpMWPBwFnvJlloqBOpFLmcTuJoDRY0qct1E_GHw_wcB

 

Dunno why the site is blocked

 

No it's not

 

That sounds about right

 

That doesnt make sense. The rear is 1 to 1

 

If you want the truck level I think it's right.

 

But if the rear is 1 to 1 wouldnt a 2.5" block provide 2.5" of lift?

 

True.

I was thinking they are 2.5" blocks with the 1.5" aal would make it level to a 6 in front

 

It should lol I'm just saying what I read. Type in to google 'procomp 6 rear lift' I clicked on the first link I think

 

Lol gotcha. Is the rear 2" over the front or 1.5?

 

They run a 2.5 block p/n 95-250 and 1.5 add a leaf p/n 13129

 

I have a set sitting in my garage they are 4" steel blocks with a 1/4" of pinion angle correction so 4" on one end and 4 1/4 on the other end. The kit does come with and AAL that does very little lift other than the thickness of the leaf itself. It is important to remember that the Taco stock sits about 2" low in the front so if you want to end up level you will always go 2" more in the front than the rear.

 

Right!

 

Wrong

 

So I finally got of out the office and went out and measured my pro comp blocks

They are indeed 2.5" and tapered