South Florida B.S. Thread

I say we have a Taco meet this weekend!!!

 

There actually is one on Sunday June 22nd. Few guys (most from Miami actually) are heading out to Lazy Springs. Supposed to be a great place to hit up. I'm like 50/50 right now as to whether I can make it, but I'm gonna try.

 

Thank you...!!!

 

This correct? Missing anything?

 

As far as the shock bolt? It's awefully high guess it just depends on the shock though.

And that castle but on the UCA isn't going to be fun to remove in the even you need to. I'd paint the arm itself with that surface rust. I always painted just about everything in the wheel well to keep it looking new and black because the mud and sand always seemed to discolor the whole area.

 

As far as the shock bolt yes, is it missing a bushing or something? I didn't install the shocks I watched him install it. I was going to paint it but I don't want to take it all off and have my truck decommissioned for a day or so.

 

It doesn't look like it's missing anything. Would help if you wanted to throw a little spacer on top of the coil though.

And as far as paint I just went hog wild with spray paint.

 

Probably going to be getting Eibach 3inch lift coil and 2.5 aal in the rear since I didn't like the little lift the bilsteins gave me.

 

Yea I went OME 3" lift with 1.5" AAL to level it but the stock springs were so shot, I got the all pro 3" leaf pack. Loved it! But when we put the coils in the front, I didn't have much thread left on that top screw like you have.

 

Any of y'all interested in a canoe? 15.5' flat back on a custom made trailer. Canoe isn't perfect but doesn't let in water.

 

thanks buddy I did enjoy a nice day on the beach with the family.

some to everyone else happy late fathers day. Haven't had a lot of
time to chime in on here lately. hope everyone's doing good.

 

Thank you Dan! Same to all the fathers here! Sorry that I didn't respond earlier.

I drove to my dads house in Tarpon Springs on Sunday morning & then to Kissimmee, Fl. for a Managers Convention in Kissimmee, Fl. on Monday morning. I head home tomorrow. I'm gonna try to make the Lazy Springs meet also.

 

Had to help a friend pick up some wood flooring today. Was going to do two trips, but it was about to pour with rain, and we had to make it in one trip... Came out to like 1800lbs. Truck drove great. Surprisingly well in fact. Couple bumps had me smacking the bump stops, but that's to be expected with that weight...it was almost a ton after all.

 

For stock that is EXCELLENT!

 

no its a spyder bull bar with the skid attached....

 

3 long months brodah

 

right on my profile page....
let me know if you need more. or you seem to be near me too if you jus wanna meet up

 

Here ya go...

 

haha

thx!

sux on the mobile

 

No worries...I feel your pain. I post most of my comments from the iPhone.