Tacoma Bed Light Kits

Well two days into our expo trip and the lights wouldn't turn on. Not sure what the failure point is yet but I'll troubleshoot this weekend and see where it is. Maybe the copious amounts of dust , more to come...

 

Have you checked your fuse?

 

No but it was the first thing I though of and will be checked tonight.

 

Check that and if its ok check ground and butt connectors.

 

If anyone ever got a kit and hasn't posted pics, post them in the new thread. I know there are a few of you out there

 

still waiting to see pics of the warm white kits I sent out

 

Finally got around to troubleshooting the issue. It ended up being the disconnects that attached to the switch. At first I thought the switch had crapped out because I took both positive lines, connected them together and the lights turned on so I knew all the wiring was good. But then I noticed that when the disconnects were attached to the switch they were not that tight, sure enough if I wiggled them around I could make the lights flicker so I replaced both the disconnects. For some reason the new ones had a much tighter connection to the switch. I wrapped them up with some electrical tape for good measure and I'm back in action.

Thanks for the great product!

 

Man I was getting worries waiting for your response!! Glad to see your lights are all good. Thanks for getting back to me when you had a chance.