A Girl's Bed liner woes

Congratulations on the Tacoma and welcome to TW!

 

Respect my authoritah!

 

And then the jokes stopped hahah

 

http://

Here ya go. A full bed

 

That bed is all kinds of messed up.

The large square holes above the wheel wells are "cubbies"... just a couple of boxes without doors where you can store tie downs and other items you want to get stolen.
The small ripped holes in the side are from someone probably trying to tie down a load improperly, or god knows what but those are not the factory tie-down locations.

Factory, there are two D-rings at the rear by the tailgate, and the C-channel that runs around the top of the bed.
The C-channel holds (from the factory) four tie down cleats as shown in the picture above.

 

He's in Florida.
She referred to I-15, so that's somewhere between San Diego and Great Falls.

 

Those would be liners from the 1st Gen or Tundra.

2nd Gen is bolted to the frame, and the bed sides and rear frame/tailgate are bolted to the bed (like any truck).

 

A blonde in need of sunblock!

 

This has to be a joke! If its not, sorry for your purchase since that is some serious abuse and neglect. You would need to replace the bed entirely to fix it.

 

I was just hoping to see a unicorn.

 

99% of us did.

 

If I had to start from scratch with bed rails, I'd just use Unistrut:

http://www.homedepot.com/p/Superstr...-ZA12HS10PG/100156509?N=5yc1vZ1z116bdZ1z113ht

There's a ton of accessories for those slots and you can get galvanized, brass, and painted dark green for the rails.

 

As others have said, call Camelback Toyota, they have the best prices around. Tell them you are a TW member. To do it right you need to replace the bed and the rails. CBT can get you the rails, they are ~$90 a piece, or as others have said, got with after market rails.

Call around to the junk yards in your area. Or try car-parts.com I did a quick search on there, without know all your details and it came up at around $2600 for a complete bed, not including shipping or taxes. So, this will be an expensive fix.

 

I don't tie anything heavy to that rail.

I wouldn't waste a dime fixing those holes or replacing the rails. I'd spend the $25 and buy d hooks for the bed and call it good. Farm trucks get the shit kicked out of them anyways.

 

Flat bed mod?

 

Someone is in trouble !! Lol

 

Haha.

Amazes me how TW treats the new ladies.

Good luck OP.

 

I clicked it because it said "bed liner" and it was in 2nd Gen.