What Have You Done To Your 2nd Gen Tacoma Today?

Yes you do! So easy! Then next buy the TRS LED fogs!

 

X2^^^^

 

I see everything is connected, but where's it tuck in so that the cover can be placed back on the box?

 

Outstanding!!!

 

NO splicing and so easy to put back to normal!

 

Here's mine. Mine can come on with the truck fully off.

 

This is mine from a '14 DCLB TRD sport.

 

Hey Riley what's with the marks on the relays. Did you do that?

 

Oddly enough... No I didn't. Brand new truck with markings... Not to sure why, I'm guessing it's a quality assurance check out of the factory.

 

Hmm interesting.

 

Got another set

 

Redoing the wiring?

 

Put some AAL's in the back from toytec.Took me 1.5 hours to do both sides after work today.My 5100's showed up in the mail for the front but I'll get them tomorrow.

 

Detailed the interior after the holiday weekend road trip!

 

What are you putting them in at?

 

Put on TRD fake beadlock rims and gave her a good bath.

 

I've only had my Tacoma for a little over a year, and today did my first "modifications." I added two Army Surplus D-rings to the bed as per the the instructions on these boards. I also added a small Kobalt tool box.

Gotta start somewhere, right?

I'm starting a pressure washing business, so getting ready to store and lock down gear. I'm sure more mods will follow soon.

 

I am going to try the highest setting first and if I don't like it I'll drop it down a notch and try it.The job seems easy enough to do.I also don't mind a little rake as long as the rear is higher than the front. I have the 2 leaf with the overload on the back(non tsb).The AAL says 1.5 - 2 .So I would think at 2.5 in the front I would still be low in the front a tiny bit which is fine.I'll take a picture when I am done.

 

Nice, I did basically the same. Put a wheelers progressive 3 leaf aal in the back with overload still in. 5100s up front at 1.75. They supposedly are pretty rough at 2.5 and possibly make it not possible to get a good alignment. Still may put some 1/4" top plate spacers up front for extra lift, but I'm gonna see how it settles first

At 2.5, you may not get a good alignment with STOCK UCAs, could get aftermarket ones to achieve proper alignment