Official* New England Buy/Sell Tacoma Marketplace

Steve you are sending me your PM's. I am just another guy that said I would take it.

 

Free is pretty tough to beat. I've got a DC shortbed so I'm worried about fitment...when you had them on god they extend passes the back of the cab towards the bed? I'm thinking if not they would fit. Also, do you happen to have the hardware for install? For a price that high I would expect all mounting hardware to be included, lol.

 

Here are pictures of the trailer
Loadrite 5x10
Pressure treated sides w/ stainless steel hardware.
Wiring and marker lights were replaced a couple years ago when I bought it.

 

It's been a couple of months since I took them off so I don't remember if the bars extend pass the cab. I'm 95% sure they will fit your DC SB. I'll check and will post up a pic after work today.

As for the hardware, you'll need 18 bolts (6 per side). I left the half rusted bolts on my truck to "plug" up the threaded holes in the frame so it wouldn't rust faster than leaving the holes exposed. You should be able to go to Lowes/Home Depot and grab some bolts from there.

 

Just looking at where the mounting points are, they will fit a DCSB. They bolt up to the body and are easy to install / remove. They're the same as a set I used to have.

 

Bump with a price drop.600.00

 

You always said you wanted an overland Tacoma, you should remake the Toyboata from Topgear BBC

 

Not in the cards for now. Someone will need a motor.

 

It is a 1300.00 motor that you can have for less than half. It will go well with the small boat you buy to have those father and son fishing trips

 

Sounds good, I'll keep an eye out for the pics but it sounds like they will fit. Any idea of the bolt size?...I obviously don't mind buying bolts, I'm just trying to save myself for trial error-ing a bunch in the parking lot.

 

Yup, understood. I'll get the pics up this evening as well as measure out the specs for the bolts... thread pitch/length.

 

That would be awesome, thank you.

 

Honda crf50 for sale. Has bbr frame, Elka shock, takagawa 88 motor. Marchocci front forks, fmf race pipe. Many more extras have about five grand in it. Want to sell don't ride it anymore 2500. Located in Chicopee mass.


Thanks Kevin

 

I have a set of brand new leaf springs for a 1st gen Tacoma. I just had my frame replaced and they gave me the replacement springs. I'd say 200 or best offer. pretty much open to anything just taking up space. Can get pics if anyone wants.

 

NO SHIPPING!!! Sport hood for sale. Includes OPENED UP scoop insert also known as scoop guide. Hood halfway sanded down. Will need to be sanded and painted. Has a few scratches and not easily noticeable dents. Insert is black and has a broken tab, still secures ok. Asking $150 Obo. Local pickup in Meriden Ct. NO SHIPPING!!!!!! Pm with questions.

I will be traveling to Marlboro Mass. on 7/17/14. I could bring up with me if needed. Nosy dogs not included.

 

Here is the pic that shows the nerf bar only reaching to the end of the cab. I tried to align the mounting points as best I could to show the example.

As for the bolts. They just use a just metric m8 x1.25 30mm bolt. You'll need a dozen. I would pick up a dozen flat washers too to spread the load under the bolt head when you mount these to your truck.

GONE

 

2014 TRD Sport Bilstien struts and shocks with around 1600 (one thousand six hundred) miles on them.

SOLD

 

Great, yeah I'll take them. I'm heading out of town after work Wednesday and coming back Saturday so could I pick them up on Saturday or Sunday this weekend?

 

The weekend is good with me too.

I just PMed you my number. Give me a call later this week.

 

Any interest in an Access Limited Edition tonneau cover for a long bed? This is it I will post pics later if need be. http://www.autoanything.com/tonneau-covers/access-limited-edition-tonneau-cover