MARYLAND TACOMAS

I did now? Well alright. Welcome bud!

I love how the name is butchered every time.....just like my real name

 

Yeah, I was just kidding, but I'll be goin through there in a couple weeks on a road trip. Lol butchered? Cmon AR10Xar15

 

Just noticed my coolant is low. What should i do about that

 

I just filled mine a little with the coolant meant for Asian vehicles, aka pink coolant. Should get toyota fluid though, I think someone on here said it was better, but I'm not sure

 

But where i get it at?

 

Plastic Engine cover removed, will test results later.

Rear diff breather relocation done....will post pictures later.

 

I think i've noticed a 6-8degree difference in intake air temperature. Conditions are a little cooler today than yesterday so i'll drive around for a few more days with it off and see if its really that much cooler....


Rear diff breather relocate:

 

But I thought it was AR22xAR45

Dealer only. Don't get any other coolant except toyota coolant... And DO NOT add water... Youll have to get a whole flush then\/

 

LOLOLOLOL!!


And thats what i was afraid of :|
thank you

 

Fill it up.

Dealer is the only place I have fond it.

Not that bad at $20 a gallon. Certainly better than an overheated engine.

 

Toyota coolant is better than other pink/asain coolant? I topped mine off months ago and its been fine. And thanks for posting diff breather pics! Reminded me I have to do that tomorrow and paint some stuff

Should have it flushed eventually though.

 

Gonna do an oil change soon, change all fluids in both diff's and transfer case, flush brake fluid. I may need new rear brake shoes, not sure. My brakes feel soft

 

Woot Maryland crabs!

 

I'll be talking to my dealer tomorrow. I don't feel comfortable running with anything below that minimum line.

I have more diff breather pics but none turned out as well as i had hoped because of poor lighting
I only used 6ft of hose though. It was tight but worked out nicely; and i left plenty for axle movement, i'll just have to redo it if/when i lift.

Just did all of that
I'd leave the brake fluid alone. Its fine.

How many miles you at?

 

Just installed my bamf bed rail mounted cb anntena mount and need a good ground in the bed. Anyone know of any good grounding points in the driver side front portion of the bed?
Ima take the multimeter out and check tomorrow but any input would be appreciated.

 

Negative batman, mine had problems grounding there as well.

 

Yea the bracket bamf made has a grounding screw just needa make a grounding strap. I'm getting a decent ground from a few places but just gotta find time to test the swr. I have my cb in the center console so unplugging the wires to hook up the meter is little but more of a pita for me than a normal cb.

 

I used about 6.5 ft. And I'm at 105,000 miles, but they are very soft

 

So I called Absolute Pro-Formence looking for an upgraded clutch for mine... Nothing.

 

Why is suspension so damn expensive? I just want some good leaf packs and rear shocks without selling a kidney.