Waterproof Fuse and Relay Boxes - RFRM (10 relay) & RTMR (5 Relay) no Blue Sea/ SPOD

Size comparrison

 

I'll work on these after dinner

 

Subbing, may be interested soon.

 

For anyone interested in a 10 relay. 2 of the smaller boxes are still smaller then one of the larger boxes. For any one that is concerned about the lost of space

 

subbed

 

Like the black on black!

 

FYI - All of the boxes are coming with SPDT relays. This makes it easier for future upgrades if you so choose to use the second pole.

 

Hmm... When would a double throw be needed? Others probably have more imagination than I do. I'm drawing a blank.

 

Reversing the direction of a motor, car stereo applications, daisy chaining, etc. http://www.the12volt.com/relays/page5.asp

 

Some teasers.

 

Woot one of those is mine I bet!

 

Bennett & CSJumper & couple others that are in this box.

 

That's a good looking box then!

 

Lol.

Harnesses.

 

Where are you getting the spools of wire?

I picked up 5 or 6 different colors of 100' for $30 I think.

Edit:

 

Colors . .




I did an ebay special too. For now that is. Placed an order for 5000 foot rolls of 20 colors printed for me. Wont be done until the middle of next month though. Didn't want the client base to have to wait. So i Did the quick route. The wire pictured is from online, auto parts stores, and leftover from a local bank auction of a Car Audio shop.

- Weatherpack connectors are in transit too. 1000 mating pieces with all the bells and whistles are in transit. That will be the only holdup on one of the boxes to be completed.

 

Updated Op with approximate pricing on Advanced harnesses. Each build is unique, please keep that in mind.

Copper isn't cheap either

 

A note on install. Please take a look at the orientation of the Fuses and relays in Reference to the "Bussmann" label. Notice it is upside down?

This is done intentionally.

 

I am trying to keep the Negative buss as close to the intended mounting point. In this case, would be a BOLT used to attach it to the truck.

On the underside, I used a Sharpie to mark the terminals/ Studs in the appropriate color code for the hookups.

i.e.. RED is positive to the battery and Black is Negative/ Ground to the truck. There will be wire already on these terminals ready for install. This is just in case someone removes them and gets confused.

Additionally included, a bolt to go into the stock screw location for the ground. A second can be included if you choose for an additional $2

 

Anyone ever get mail on a sunday? ummmm, I did, freaks me out a bit.