Installing 2012 stock radio in a pre-2012

That sir is your usb connector, it transmits the info for music to play, if not connected u will be able to charge usb but no aync with the head unit

 

What is the "AUX in" pinout for the radio? I'm on a 2011 stock radio. In my 2005 truck. All is plug and play. EXCEPT I have the aux wires now that I need to put in the Steering wheel control harness on the back of the radio.

 

I have a 2011 with a 2013 entune. The GPS was doing the same thing as yours until I tapped into the speed sensor wire.

 

Look here https://www.dropbox.com/s/83xkkj1n5rj224o/ENTUNE CONNECTIONS - 2010-2012 TACOMA.pdf

 

Thanks. Posting my pics here also for the masses.

 

If you match the pins on the connector to the chart I posted you should be able to see what goes where.

 

Thank you again! rep'd - Was more posting the pics for the masses.

 

So with this picture,



and your Pinout Charts, I should be able to do this in 5min flat.




Reference to the chart vs the wire harness color codes.

15. Black w/ Silver speckles
16. Red w/ Silver speckles
17. White w/ Silver speckles
18. Electrical Tape Black
19. BLUE

 

Hey,
I own a 2011 Double cab Taco with JBL System, I hate the bluetooth that comes with that radio, so I just got my new Radio with display model number 57016 and part number 86140-04060. I also bought the USB harness and plug, the antenna adapter, the R3-R10 to R15 adapter, Until now it's working great, but I have some questions that probably you can help me solve:

1.- My new radio came without the extension module, what is this for? The audio and phone bluetooth works fine, the same with the XM radio and steering switches, and the USB plugs directly into the main unit. So I guess it's only for the navi option, am I right?

2.- My system came with the MIC on the rear view mirror, but I upgraded it to a 2013 mirror, because it has a bigger display and compass and Temp (temp in the mirror does not work, yet), so I had to buy the newer MIC that goes at the Overhead console. I would like to have the MIC harness connector (that one that comes from the radio into the MIC's conector) I think it's the female one. Does anybody know it's part number?

3.- I would like to buy the 2013 radio bezel, so my new system fits properly, but I do not know the part number as well. Note that I need the 4WD part.

4.- After changing the new radio bezel, if it comes without the 4wd switch, I think that 4WD switch I have won't fit, so if you know the part number of the newer one, I'd be pleased.

Thanks a lot this thread has been very useful for me.

 

I have a 2009 DC TRD Sport with stock radio and bluetooth (and steering wheel controls). Would love to have the bluetooth functionality of the 2012+ models (phone just connects and plays music AD2P over BT, etc) but still be able to use my controls, etc.

Other than the 2012 Head Unit, what do I need? Can anyone summarize this for me? I got lost in the thread... is it a plug and play swap? Matching wires? Will it sit flush?

Thanks.

 

I have a 2007 non-jbl radio now. I would like a touchscreen with Bluetooth or connection for my phone or ipod. I don't have to have navi. or entune. I have audio controls on my steering wheel I would like to work. It looks like I need a 2013 non-entune radio for this. What connectors would I need to make this work. THanks

 

You're Welcome . . .

http://www.tacomaworld.com/forum/2n...ouchscreen-entune-audio-plus.html#post9005063

 

Thanks again this looks like what I need. I've sent a pm to him.

 

Only trying to help, I like this lil place on the web . . .

 

Hey Jerez I'm interested in the A/V on my touchscreen 2013 tacoma. Was you able to view video on that?

 

I have a 2005 and I am in the same boat. I need a new head unit and would like bluetooth connection. Am I better off just replacing the head unit and getting something like the Grom Audio unit for bluetooth or is a factory Bluetooth possible? If so, what would I need.

 

I've got the grom unit and it was plug and play with my 08.

 

sub'd

 

I got this mic with my radio (2013 non entune)
My 2010 sr5 access cab didn't have blue tooth before, I know it goes between the map lights but I can't see a matching plug above my head liner. Has anyone else wired up this style mic with their conversion?
Any info is a help
Cheers