1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Florida B.S. Thread

Discussion in 'Florida' started by Jason'sLawnCare, Jun 19, 2010.

Page 2729 of 4266
  1. Aug 10, 2014 at 4:56 AM
    #54561
    SOS CONCEPTS

    #54561
    SOS CONCEPTS Bumper builder

    Joined:
    Sep 9, 2013
    Member:
    #112175
    Messages:
    15,658
    Gender:
    Male
    First Name:
    SOS
    Laurens SC
    Vehicle:
    17 sos buggy, 09 taco(in pieces), 14ram 3500
    Rock bouncer
    Come to find out I don't have abs system. I have Atrac so in theory I shouldn't need a front locker. But I don't think it works
     
    SOS CONCEPTS, Aug 10, 2014
    #54561
  2. Aug 10, 2014 at 6:31 AM
    #54562
    Alfuh

    #54562
    Alfuh It's pronounced alpha

    Joined:
    Aug 21, 2013
    Member:
    #110878
    Messages:
    6,786
    Gender:
    Male
    First Name:
    Chris
    Bismarck, North Dakota
    Vehicle:
    2006 Prerunner
    I have a few mods
    Yesterday I finally got my brake line crap sorted out. Since my visit with restylers these lines were supposed to be in the rear but they ended up installing them in the front. Now the maxtrac lines that came with my spindles are now up front and the long ones in the rear....like it was supposed to be. With the help of another TW member also got the parts in the drums replaced and brakes bleed. Parking brake is now properly working but still need to work on the pedal travel to get it stiffer

    u2usaran_d4b7303573af44b42e25d68dc647a059d432e8b7.jpg
     
    Alfuh, Aug 10, 2014
    #54562
  3. Aug 10, 2014 at 6:51 AM
    #54563
    ckeene9

    #54563
    ckeene9 Well-Known Member

    Joined:
    Sep 20, 2012
    Member:
    #87325
    Messages:
    10,848
    Gender:
    Male
    Chesterfield, VA
    Vehicle:
    '12 DCSB Supercharged 4x4 TRD Sport
    See Build Thread
    OR don't have the ABS there but on the brake booster.
    Oh you need a locker :D
     
    ckeene9, Aug 10, 2014
    #54563
  4. Aug 10, 2014 at 7:27 AM
    #54564
    SOS CONCEPTS

    #54564
    SOS CONCEPTS Bumper builder

    Joined:
    Sep 9, 2013
    Member:
    #112175
    Messages:
    15,658
    Gender:
    Male
    First Name:
    SOS
    Laurens SC
    Vehicle:
    17 sos buggy, 09 taco(in pieces), 14ram 3500
    Rock bouncer
    Chris do you gave the pressure sensor on the compressor? Or just the air fitting
     
    SOS CONCEPTS, Aug 10, 2014
    #54564
  5. Aug 10, 2014 at 7:32 AM
    #54565
    ckeene9

    #54565
    ckeene9 Well-Known Member

    Joined:
    Sep 20, 2012
    Member:
    #87325
    Messages:
    10,848
    Gender:
    Male
    Chesterfield, VA
    Vehicle:
    '12 DCSB Supercharged 4x4 TRD Sport
    See Build Thread
    Yes, I have the sensor. Otherwise it would over pressurize that manifold.
     
    ckeene9, Aug 10, 2014
    #54565
  6. Aug 10, 2014 at 7:39 AM
    #54566
    SOS CONCEPTS

    #54566
    SOS CONCEPTS Bumper builder

    Joined:
    Sep 9, 2013
    Member:
    #112175
    Messages:
    15,658
    Gender:
    Male
    First Name:
    SOS
    Laurens SC
    Vehicle:
    17 sos buggy, 09 taco(in pieces), 14ram 3500
    Rock bouncer
    Do you have a air hose fitting on it to?
     
    SOS CONCEPTS, Aug 10, 2014
    #54566
  7. Aug 10, 2014 at 7:47 AM
    #54567
    ckeene9

    #54567
    ckeene9 Well-Known Member

    Joined:
    Sep 20, 2012
    Member:
    #87325
    Messages:
    10,848
    Gender:
    Male
    Chesterfield, VA
    Vehicle:
    '12 DCSB Supercharged 4x4 TRD Sport
    See Build Thread
    Yup! Had to change out the standard orange air line to a braided steel one due to high heat causing it to balloon and blow off.

    image.jpg
     
    ckeene9, Aug 10, 2014
    #54567
  8. Aug 10, 2014 at 7:54 AM
    #54568
    river rat 69

    #54568
    river rat 69 Well-Known Member

    Joined:
    Dec 6, 2010
    Member:
    #47249
    Messages:
    16,574
    Gender:
    Male
    First Name:
    Jim
    Orlando, Fla., Green side of the grass
    Vehicle:
    007, trd, sr5, fmf.
    NO Chrome,3" NFab's steps,TRD skid,Wet okie's.011 grill, k&n,5100's,All this comes right off when the old lady says let's go get a NEW ONE!!!
    [​IMG]
     
    river rat 69, Aug 10, 2014
    #54568
  9. Aug 10, 2014 at 8:42 AM
    #54569
    xweslingx

    #54569
    xweslingx Well-Known Member

    Joined:
    May 19, 2013
    Member:
    #104486
    Messages:
    3,186
    Gender:
    Male
    First Name:
    Wes
    Durham, NC
    Vehicle:
    09DCSB locked and armored
    Just gussets... everywhere

    Or get rid of abs and it's gayness altogether.

    Agreed atrac ain't shit.
     
    xweslingx, Aug 10, 2014
    #54569
  10. Aug 10, 2014 at 10:32 AM
    #54570
    20vmki

    #54570
    20vmki Well-Known Member

    Joined:
    Jun 20, 2014
    Member:
    #132329
    Messages:
    464
    Gender:
    Male
    First Name:
    Eric
    Florida
    Vehicle:
    '03 PreRunner Limited
    OME 3in lift, Spidertrax 1.25in spacers
    They like it!

    IMG_20140810_120859_b4955582b42558b0a40e7f25ce31a82e450a2017.jpg
     
    20vmki, Aug 10, 2014
    #54570
  11. Aug 10, 2014 at 11:11 AM
    #54571
    Tayler08trd

    #54571
    Tayler08trd Well-Known Member

    Joined:
    May 27, 2014
    Member:
    #130740
    Messages:
    1,054
    Gender:
    Male
    First Name:
    Tayler
    Pearland, tx
    Vehicle:
    2008 toyota Tacoma trd off-road
    K&N air filter, Nef side steps, 6 inch DB, 33 inch toyo open country R/Ts, 18 inch fuel wheels
    From the Houston area drove the Yota staying in panama city beach wondering if there was any good places to ride the truck
     
    Tayler08trd, Aug 10, 2014
    #54571
  12. Aug 10, 2014 at 4:04 PM
    #54572
    anders99

    #54572
    anders99 The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    Does anyone know a fuse under the hood that is only on with the ignition? I am trying to make it so my Halos and LEDs just come one with out having to turn on parking lights
     
    anders99, Aug 10, 2014
    #54572
  13. Aug 10, 2014 at 4:25 PM
    #54573
    SpruceTaco

    #54573
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Can you hook them up directly to the battery with an in line fuse to a switch or go with an add a circuit fuse in the fuse block under the dash to a switch.
     
    SpruceTaco, Aug 10, 2014
    #54573
  14. Aug 10, 2014 at 4:33 PM
    #54574
    anders99

    #54574
    anders99 The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    I have an add a fuse ready to go but was trying to avoid pulling another wire through the firewall
     
    anders99, Aug 10, 2014
    #54574
  15. Aug 10, 2014 at 4:57 PM
    #54575
    SpruceTaco

    #54575
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Oh, so you want them to come on when the truck is on with no switch?
     
    SpruceTaco, Aug 10, 2014
    #54575
  16. Aug 10, 2014 at 5:00 PM
    #54576
    anders99

    #54576
    anders99 The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    Yeah, so they are off when the key is off but when the car is on they are on
     
    anders99, Aug 10, 2014
    #54576
  17. Aug 10, 2014 at 5:36 PM
    #54577
    SpruceTaco

    #54577
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Just went out & looked at mine, thought maybe there was one marked for dtrl but there wasn't. The only thing I can think of is use a test light to check the empty ones.
     
    SpruceTaco, Aug 10, 2014
    #54577
  18. Aug 10, 2014 at 5:40 PM
    #54578
    ckeene9

    #54578
    ckeene9 Well-Known Member

    Joined:
    Sep 20, 2012
    Member:
    #87325
    Messages:
    10,848
    Gender:
    Male
    Chesterfield, VA
    Vehicle:
    '12 DCSB Supercharged 4x4 TRD Sport
    See Build Thread
    Why not just tap the DRL wires?
     
    ckeene9, Aug 10, 2014
    #54578
  19. Aug 10, 2014 at 5:45 PM
    #54579
    SpruceTaco

    #54579
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    I was thinking the same thing but he has an 07 base & wasn't sure if it had dtrl's.
     
    SpruceTaco, Aug 10, 2014
    #54579
  20. Aug 10, 2014 at 6:01 PM
    #54580
    anders99

    #54580
    anders99 The Sailing Member

    Joined:
    May 28, 2013
    Member:
    #105101
    Messages:
    1,917
    Gender:
    Male
    First Name:
    Matthew
    Penscola, FL
    Vehicle:
    (07 Base 4cyl 4x4 - RIP) -> 2018 4Runner SR5 Premuim
    Taco SOS Offroad Concepts hybrid front bumper Iggy Corp. Switch panel Famous Fab ditch lights and cb antenna mount Pioneer Appradio 2 Halo Led Headlights Led Taillights 3'' toytech spacer lift on front end Toytec AAL on rear AFE cold air intake 4Runner Stock
    That was my next plan.

    Yep DTRLs didn't come stock with mine.
     
    anders99, Aug 10, 2014
    #54580
Page 2729 of 4266

Products Discussed in

Mobil 1 104361 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)
$27.50
Air Intake Snorkel Kit Fit For 2005-2015 Toyota Tacoma With 4L Right Petrol intake air snorkel kit high performance system compatible kit Replacement black Rotational Molding (2005-2015)
$73.00
Toyota Genuine Parts 90915-YZZD3 Oil Filter 1 Case (QTY 10)
$52.74
Power Stop Brake Kit For 2007-2014 Toyota FJ Cruiser, 2005-2022 Toyota Tacoma 6 Lug, 2003-2009 4Runner 12.56" Rotors - Front Carbon-Fiber Ceramic Brake Pads & Drilled Slotted Rotors Replacement, K137
$214.79
M18 Cordless Lithium-Ion 6-1/2" Circular Saw - 2630-20 - ( MILWAUKEE ) - BARE TOOL
$115.55
Toyota Genuine Spark Plug
$6.01
UTG 3-12X44 30mm Compact Scope, AO, 36-color Mil-dot, Rings , Black
$178.88
Magswitch 8100747-600 Amp Ground Clamp
$166.99
Genuine Toyota 4Runner TRD PRO Matte Gray Wheels PTR20-35110-GR (Fits: 4Runner - Tacoma - FJ Cruiser) (4)
$1,156.39
Boulder Tools Heavy Duty Rapid Tire Deflator & Molle Pouch - Precision Release Button Air Down Offroad Kit - Glows in Dark, Bonus: Valve Caps, Cores, Repair Tool | Quickly Deflate 4x4 Off Road Tires
$19.98
Tire Deflator Kit Universal Adjustable Pack of 4 Automatic for Cars, Trucks
$14.41
SWR / Power METER for CB Radio 100 Watts - Dual Meters - Workman SWR3P
$46.74
Super Swamper Trxus MT Radial Tire - 35/12.5R15
$430.79
Uniden BEARCAT 880 CB Radio with 40 Channels and Large Easy-to-Read 7-Color LCD Display with Backlighting, Backlit Control Knobs/Buttons, NOAA Weather Alert, PA/CB Switch, and Wireless Mic Compatible
$140.22
BaoFeng BF-F8HP (UV-5R 3rd Gen) 8-Watt Dual Band Two Way Radio (136-174MHz VHF & 400-520MHz UHF) Includes Full Kit with Large Battery
$62.89
3M Auto/Marine Sealant 10 oz.
$36.19
Squirrelly 4" to 3" Inch Elbow Black Silicone Reducer Coupler 3 Layers Reinforcement High Level 45 Degree Turbo Intake Pipe
$19.98
Walker Heavy Duty 41428 Exhaust Elbow 3" Inlet (OD) 3" Outlet (OD)
$24.99
Uniden PRO505XL 40-Channel CB Radio. Pro-Series, Compact Design. Public Address (PA) Function. Instant Emergency Channel 9, External Speaker Jack, Large Easy to Read Display. - Black
$56.63
Power Stop B871 Autospecialty Brake Shoe For Toyota Tacoma 2005-2023 [Model Specific]
$34.65
PowerStop Front Truck & Tow Brake Kit For 2005-2009 Toyota 4Runner, 2004-2010 FJ Cruiser, 2016-2023 Tacoma - 6 Lug Drilled and Slotted Rotors Carbon Fiber Ceramic Brake Pads Replacement, K137-36
$195.78
Midland 75-822 Handheld CB Radio & Mobile CB Radio – Walkie Talkie with 40 Channels, NOAA Weather Alerts, Long Range, Compatible with CB Antennas
$89.99
Old Man Emu D29XL Leaf Spring
$81.89
SECULOK 2" x 27' Heavy Duty Ratchet Tie Down Straps w/Double J Hooks, 3333 Lbs WLL Cargo Control for Trucks & Trailers, 2" Durable Straps for Motorcycle, ATV & Boat Transportation, 1 Pack
$15.49
OTC 4421 2-Jaw Pilot Bearing, Thrust Washer, and Small Bearing Pulling Attachment
$42.64
Dupli-Color EBTY16237 Perfect Match Automotive Spray Paint – Toyota Dark Blue Pearl, 8P4 – 8 oz. Aerosol Can
$17.79
FireStik K4 Antenna Stud Mounts
$10.98
Uniden PRO520XL Pro Series 40-Channel CB Radio. Compact Design. ANL Switch and PA/CB Switch. 7 Watts of Audio Output and Instant Emergency Channel 9. - Black
$69.98
FireStik K-4A Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts
$12.95
Tweco 9250-1144 Tw Rg-440 Clamp9250-1144
$1,103.99
Energy Suspension- 9.4101G UNIVERSAL MOUNT
$33.99
Meguiar's Smooth Surface Clay Kit - Safe and Easy Car Claying for Smooth as Glass Finish - G1016
$31.15
Blue Sea Systems 5026 ST Blade Fuse Block 12 Circuit with Ground and Cover, 100 Amps
$31.00
VIAIR 300P - 30033 Tire Inflator Portable Offroad Air Compressor for Truck & SUV, 12V On/Off Road Tire Pump Air Compressor Portable Heavy Duty 150 PSI
$174.99
Supreme Suspensions - 3" Front Leveling Kit for 2005-2023 Toyota Tacoma 2WD 4WD - T6 Billet Aluminum Front Lift Strut Spacers (Black)
$42.89
Tokina 11-16mm f/2.8 AT-X116 Pro DX II Digital Zoom Lens (AF-S Motor) (for Nikon)
$379.00
Firestik KW6-R Original 6 ft. Antenna -Red
$48.64
aFe POWER Magnum FLOW OE Replacement Air Filter w/Pro DRY S Media for Toyota Tacoma 05-15 V6-4.0L #31-10114
$75.66
ProComm Im-AF Splitter CB AM FM Radio Audio Stereo Antenna MultiPlexor
$29.88
American Sound Connection Kicker Bundle Compatible with 2005-2012 Toyota Tacoma Double Cab 43C104 Comp C10 Dual 10" Loaded Sub Box Enclosure
$289.95
(2) Pair of Metra 72-8104 Speaker Wire Adapters for Select Toyota Vehicles - 4 Total Adapters
$17.80
Ergotech Triple Horizontal LCD Monitor Arm Desk Stand (100-D16-B03)
$244.96
To Top