What have you done to your Tacoma today? 1st Gen Edition

Thanks for all the replies

 

anyone know which thread actually shows the photo of the small ebrake lever extensions? my cable is rubbing the springs, pulling the ebrake,and then when I flex, it pulls even tighter. im about ready to get rid of drum brakes, pita

 

Snapped a few pictures of it. Sprayed a toyota emblem on the tailgate last week. Also, I put my hood light kit from BeeRadd on today. Will get some pics of it up later tonight

 

X2. I'm pretty sure that's what I've been hearing as my suspension flexes all this time.

 

seriously though... so annoying, it appears that my cable between the drums isn't long enough because of all the bends it makes over the leaves. someone's gotta know where that thread or pictures are??

 

http://www.bajataco.com/Brakes2.html

I've been fighting my e-brake since the day I bought the truck. I'm in the process of figuring out how to switch to a transfer case one using this guys parts. Just need to mock up some sort of drivers side bracket to fit my case, then I can throw that rock catching bastard in the trash.

 

Downtown San Antonio night shot. Thought it looked pretty sweet. Murica

 

has anybody ever had to replace the rear pinion seal? mine started leaking today. also tore the driver side cv boot, but that I can handle.

 

Damn that looks good. I like that color.

 

Did a bit of off roading. Tore a hole in one of the tire sidewalks.

 

Spent an hour chiseling off the nuts on the rear O2 sensor. PITA. Managed to mostly save the studs, then drove to 3 different places trying to fine new ones that were grade 8 or stainless. Cleaned the sensor and tomorrow I'll see if my code clears, otherwise, might be time for a new one.

 

Nice flex... Looks like you need a new corner light. I got mine for like $10.00 from rock auto, and it works great.

 

Thanks, The plastic tabs broke off a whole ago and I've been a bit lazy about replacing it.

 

x2 on the rock auto corner lights. I bought them to relocate my blinkers and they work great. no condensation either.

 

Damn! I should've been there!

 

New hood lights!

 

I could have used your high lift. Using the bottle jack on top a piece of wood on loose ground was scary. I need to get one for myself.

 

I really need some of these...

 

Longggggg dayy. Started off with an oil change with mobil1 synthetic extended life and a mobil1 filter. Next I installed a fumoto oil drain plug for easy oil changes in the future, kinda lame because its installed but I wont be able to use it until my next oil change

After that I re-installed my all pro skids, I had to fabricate a spacer out of some 1/4'' aluminum to give me some clearance with the diff drop, it actually worked out better than I thought and gave me the clearance I needed. I also had to make 2 small spacers for the 2 bolts that go into the ifs cross member. Scuffed and cleared the BAMF on my lca skids.

Also removed and painted my bed rack, and installed a FOX universal resi mount kit.

 

Looks fucking good man!