Waterproof Fuse and Relay Boxes - RFRM (10 relay) & RTMR (5 Relay) no Blue Sea/ SPOD

Better pics

 

Able to do logos too

 

before



after



although i ran out of time before i had a chance to wire things to my box. lookin fresh and clean!!

 

COngrats man Big improvement.

Did you use the extra braided loom?

 

Took them from live

 

SUBBED for future order

Ordering one of these next check. The 40 fuse 10 relay is just SO tempting! But I think the 10 fuse 5 relay should be fine for me.

 

Where did you get those brackets????????????????

 

thanks michael!
I unfortunately ran out of time in the day and had to cut the project short with wiring. I do plan on using the extra braided loom (thanks again btw). I was in a huge rush to get the CB wired.


took a piece of flat iron. (it had predrilled holes for who knows what, but they didn't line up)
bent it 3 inches in. if i did it again i'd probably due 3.5 inches in.
cut it down the middle to create two sided mounting.
drilled some holes
swapped stock bolts for longer bolts

done!

 

I'm telling you folks. The brackets aren't hard to make. Plus, if you do want one made for you. Yotamac/Ze has great product already fabbed..

 

For 2nd gens

 

Ask him. He might make them for 1st gens too. Realistically, if you just bend a piece of aluminum, you can then trace the dimensional drawing onto it and cut with a drill coupe bits then use a file for convincing it further.

If you can't source the aluminum. I find old signs/ street signs, etc. work awesome.

 

Just curious whats the turn around time?

 

10ish days from payment. My distributer really had been LAX on my orders for some reason

 

How much is it to upgrade to weatherpack connectors? Also how much for some extra connectors (weatherpack also) when I do the install?

 

Its in the OP I sell them as a pair for $5 each. Depending on what you had in mind. We could work something out. These suckers aren't cheap. I bought BULK and still was raked over the coals on them.

 

Beauty of the 5 relay is that it is so small. You can easily get one for now, then get another when the power needs arise. 2 of the 5's fit just smaller than a 10.

 

Oh I know. I looked them up. They're not cheap, but seems worth it in the end.

That's true about 2 of the 5 relays. Well I'll be getting one for now. Just ordered a 40" led bar, so I have to save for this and more light goodies

 

No stress man. Congrats on the 40". Thats the same size I have. 40" E2 Rigid

 

Thanks man, just sent you a PM with a list of lights I'm looking to run. Also will inquire about some more stuff when you reply

 

Replied to the PM.

For anyone wanting dual /multiple buss on the 10 relay box -

My suggestion would be this. Get an appropriate solenoid to control the second buss with ignition ON or ->

If everything is switched anyways, just use power form ignition for the switches so there is no need for the solenoid. More cost effective also. I do this in the harness itself.