Replacing 884 Coils with 885s to add some lift?

I have a AAL with TSB and 5100s with 884 coils installed and the front is sagging. Believe the billies are set to .85. I would like to add about an inch to the front. If i replace the coils with 885s, will i get that extra inch since theyre bit stiffer?

 

They are the same spring rate but taller

 

So will the truck sit higher? (Im a newb)

 

If I get a confirmation that I would sit a bit higher, i will take you up on the offer!

 

If you left the billies at .85 then yes

or you could get 887's and set the billies at 0 and get about 3" lift up front with the same spring rate as the 884's and 885's

 

So 885s + .85 would be taller than 884 and .85? And if I got 887 and billies set at 0, the ride quality should be the same?

 

Yes

 

No

886's are taller than 885's and have a higher spring rate

 

Where can i purchase the 887s

 

I'm pretty sure Wheelers carries them and I think Toytec has them too

 

Yeah you can access the entire OME application guide here

http://www.arbusa.com/Uploads/PDF/onlineManualsGuides/OME_Guide_current.pdf

 

So I guess I will need 885s set at .85 plus a 1/2 inch spacer to get the 3"?

 

why wouldn't you just get 887's

 

Looks like you got this under control OZ haha

 

I checked both sites and couldnt find the 887 coils

 

Here is my setup, hope it helps

Suspension:
Bilstein 5100 shocks (set at first position)
OME 885 coil set
2" AAL

Shoes:
285/75-16 DuraTrac

 

Do you guys know the part number for the 887s?

Look at mine. The front looks horrible with 32s

 

Thats such an awesome decal on the back, very nice!

OP: Why don't you set the front billies to 1.75? Maybe im missing something but that would give you another inch and be cheapest wouldn't it?

 

Wouldn't that preload the shock and spring?

 

Call Wheelers , they have them , there's probably a dozen guys on here running them now