Who's Running 31's with stock height 1st gen?!

I lifted mine 3" after I posted this, if you have plans on lifting your truck 3", just do the 285's. I've done enough research to know that 285's will fill it out a lot better than the 265's.

 

I'm worried about them fitting right. I'd hate to have to cut up my truck

 

now when you say trimming, what exactly did you trim? cause i put 32s on today and my bilsteins are on the middle setting and it scrubs. im getting it set on the highest setting now. ive also got 1.25" spacers on

 

^^ you're right. i dont want to take them off though cause it make the truck look so much better

 

What brand of tires are those?

 

No lift.
These are 31.7 essentially a “32”

235/85R16

 

11 year thread revival love it...

 

I am looking for some decent steel wheels to go on this size tire. Absolutely love the real pizza cutters on here. Open to suggestions for brand and offset for 235/85R16

 

Most local shop here say they can only mount 31 or equivalent on my 95

 

235/85 r16's. OME 881 up front set on the lowest level of the Bilstein 5100 shock body and 3 leaves added at the rear, over ride spring still installed. Maybe 2" lift? Never measured and it's probably settled since the install. There's also 500 lbs of camping gear, tools, parts and water in the back of the truck in this picture. Very happy with the tall/narrow profile. They squish out well in the dirt and go through snow very well.