Got a few questions before I pull the trigger!

I first want to say thank you to all of you on this forum for helping me!

So here we go.
I just recently ordered 5100's ( not installed yet ). I am looking at XD Monster 18X9 with a -12 offset and a 4.53 BS. The tiers and Toyo Open Country MT 275/65r18.

I don't plan on doing any off road driving.

The questions are....
1. I want the truck to sit level. So by running these wheels and tires do I set the 5100's at 1.75 and leave the back stock or do I set the 5100's at 2.5 and do a AAL / block?

2. After the truck is lifted, do any of you see any issues with this wheel and tire combo. I have seen others on this site stating they can fit this size on stock, but i think they at AT tires. I am prepared for minor cutting just no CMC!

 

Even should be 0.85 and no AAL or 1.75 with AAL/TSB

You might have to trim and remove the mudflaps but should clear the cab mount. Not a guarantee tho

 

If i go with the 1.75 in the front, will a 1" block in the back make the truck still sit level? This way i get a little more lift on the truck. I have not seen a 1" AAL. Ideas are welcome.

 

You will be close to level with a 1" block

 

Personally id steer clear of a block. The tacoma leaf springs are already pretty shitty and a block would just make it worse

 

This completely depends on which rear springs your truck has and how worn they are.

Assuming they're not worn at all.
2+1 rear leafs with 5100s set at .85, truck will sit close to level.
3+1 rear leafs with 5100s set at 1.75, truck will sit close to level.

Mine is 3+1 rear leaf plus 1" block with 5100s set at 1.75 and mine has a rake. Originally had no rear lift and truck sat level with 5100s set at 1.75.

 

Thanks. What size tires are you running with that set up?

 

Mine are just 265/75-16. Just one size over.