AZ Classifieds

Would like to see the camping set up and what color shell?

Where you moving to?

 

I'm interested in those switches.

 

Juan... how bout those spacers?

 

Those are going to JD

 

I either gotta buy some or get new wheels. Tired of having these 2nd gen wheels tucked in under my truck.

 

I have stock 2002 Tacoma suspension if anyone is interested??

Leaves
Front coilovers
rear shocks
Lower control arms
Tie rod ends
All bolts and a few other pieces.

Would prefer to get rid of it all at once if possible but open to splitting it up. Best offer for all of it! PM me if interested. Thanks

 

I need spindles please.

 

Maybe for just the arms, the skids alone sell for $131

 

It's loud!!!! Way louder than Josh's but that's because of how short it is. It would probably sound decent on a truck with stock headers and some additional tubing in front and behind the muffler.

I'm down if you guys want to split it all up but keep in mind it uses v bands not the standard 2 bolt flange Toyota that most cutbacks use. The y-pipe is off an FJ and this shorter and higher than a Tacoma Y-pipe. You would need to extend your TRD exhaust to work. Also there is no catback, it is strictly a muffler with another vband, can be easily modified to work on anything. For those not familiar vband style flanges make removing the exhaust much easier for coating, changing or whatever. They are $40 each and I can get them for you.

 

I'd take the lowers only!

 

Are you talking about coil spacers or wheel , I have a brand new set of 2 inch coil spacers for sale . Never been installed , I went with billies instead

 

Wheel. 2nd gen wheels pull the wheel in vs the stock. Wheels look tucked in and so the fender flares look stupid and useless

 

By any chance , did you buy my TRD center caps about five months ago ? And when I changed from factory 04 rims to 09 TRD rims in my opinion I see no difference in the rim being offset . Just curious

 

Allpro Ifs skid 05+. It is the non sway bar version. 150 located in chandler

 

explain non sway bar vs stock vehicles with sway bars, please. It'll only work one way?

Does it have hardware or does the oem hardware work?

 

It won't work if your truck still has the sway bar.

 

what's a sway bar?

 

It's the anti roll bar. It helps to combat rolling of the vehicle during corning. Toyota also says it's used to take some of the Taco Lean out of the driver side.

 

Sorry man, i forgot that Jason already put a claim on them.

 

Camping set up is a plywood/foam/carpet set up that goes into the bed of your truck, covered by a shell. pretty much a raised, sleeping platform with cubby storage on the side and a gap underneath in the middle for more storage. It is sized for a 6ft bed.

Shell is silver.


I am moving to Richmond, VA.