Question about lift from Icon rear AAL kit??

I currently have 1.25" blocks in the back of my 05 to complete the front 5100's set at 2.5". I'm really not crazy about blocks in the first place so I'm highly considering the Icon 1.5" rear AAL 3 pack setup. My question is, will this lift make up for the .5" lean that I currently have with my factory springs on the driver's side?? I was going to get a taller block for that one side to make up for the lean but I don't want to be ghetto. Just wondering if the 3 pack Icon AAL will even out the back once installed??? Any help would be great.

 

You need this:
from toytec.com.

just install it on the driver side and you are done. It leans due to the front of the truck not the back.

here is the website:
scroll down it costs 20 bucks.

 

Sorry but mine leans in the back. It is common in some models. I have the 5100's on the front and it's equal on both sides up front. Thanks anyway for the help.

 

No, I do not think the Icon 3 leaf aal will solve the leaning problem you are describing. The truck
will be up higher, but it will still be leaning

 

weird. mine leaned up front and the rear was dead level stock. Then I fixed the lean with coilovers by putting the driver side under more preload. NOw the driver side rear of my truck is 1/4 inch higher than the passenger side. It is hardly noticeable though and I am happy with it.