Long Travel BS Thread

Nice work!! Let's head out and shake it down.

 

Thinking on getting this one piece clip, what do you guys think?

 

nooooo

so i just finished tubbing my firewall and...

truck has NO power now...i made sure to be carfull and not cut any wires. i barely even cut into the passenger side, any ideas on what the fuck to do?

 

First things first, any check engine light?

 

did you disconnect the battery while you where welding

 

try a different battery

check all your fuses

did you unplug something and forget to plug it back in

 

I miss read that, I thought you ment performance wise. Check for 12v at battery, check fuses etc

 

Sell it and buy a 2nd gen

 

Did you mean no power as in 12v or no power as in it doesn't run?

 

U got a bunch of shit on driver side under that lil kick panel, ur 4x ecu and I believe main ecu is there. Make sure u didn't cook anything when u were welding it back up.

 

Agreed and if you didn't disconnect the battery you very well could of fried the ecu

 

So awesome..I want a 1 piece too!!

 

No cel no lights at all on the dash...nothing works besides my alarm and offroad lights


I barely cut the passenger side but I did go crazy with a hammer.battery is a brand new optima with 12.47 volts

 

Is it right behind the glovebox or down by the firewall? I'm praying the ecu is ok

 

Fuckkk it was semi disconnected...the groun was off but still lightly touching metal

 

This

Damn.

You might have to remove a plastic cover that is under the dash. When you open the glove box it's right above it. Just like one screw but then the engine harness is attached to it so kinda awkward to get out. Then you'll see the ecu.

That's how mine was anyways

 

Trying to imagine how it will look with DTFs kit and bumper

 

Glad it is something easy and not a fried ecu or some shit.

Check out Anthonys (DTF) fiberworks one piece, pretty sick.