What Have You Done To Your 2nd Gen Tacoma Today?

TRD emblem

 

I see air under that front tire...

Had the same TRD emblem...looks great. Give it a few months and it will fade and the white will yellow and crack...

 

then plan B Plistidip

 

Lol...well..enjoy it while it looks great!

 

Added two additional cleats to the front rail for tying stuff down better.

 

Oh sure! Just barely...just a really fun whoop section that I pumped a bit off the last one.

 

You got like three feet of air That time!

 

bad ass truck

 

Me like!!!!!!!

 

These parts just fell off my truck? Are they important?

If they are then maybe I need to bolt these stronger SOS skid plates on

 

Installed BAMF sliders today.



Got them on Friday and was really impressed. Nice work and teh customer service from Jerry was fantastic.
Now it is beer time:

 

Like the sliders!

 

Washed/Clay-bar/ 2 coats of wax

need to invest in an affordable power-buffer/polisher, all the parking lot scratches are starting to add up.



not sure what's up with the homer grill, looks to have slightly deformed in the middle there in the oklahoma heat?

 

Funny you should say that. I actually just had the whole thing done the whole truck. windshield is 60%. Drivers 31% rear 16%. I use all 3 M crystalline. Darkest they had was 40 percent.

HCRB in the works. Will be color match as well.

 

I thought about adding a light tint to the front windshield in order to knock outcome of the sunrise/sunset glare. It's pretty brutal here in CO. Do you have any issues with polarized sunglasses? That would be my biggest concern. Even if it isn't an issue with one pair of glasses it might be with a different pair.

 

Installed my new Wet Okoles.

 

Good choice...

 

Did you drill the bottom frame holes?

 

Yes. I purchased the drill bits that Jerry (BAMF) offers and they are the shit. Went through the frame with ease. The only thing is that you need to push the sliders towards the rear as far as the bolts will allow you to to miss as much of the double plate seam at the front on the bottom of the frame rail. Using the drill bits that I got, I still had no issue going through the frame and did not use any lube on the drill because I wanted to paint the holes with rust prevention paint and didn't want to deal with cleaning the lube off.
It took me 2 to 3 hours to do this by myself and only had a trolly jack to use.
They are nice and with the kickouts it will give me a place to stand to get to the roof rack I will be putting on in the next couple of weeks.
Really, really happy with the purchase and the install.

 

Finished my hood scoop led bar. Didn't turn out like I thought but still I like it and it puts off a lot of light. Here are some pictures. First is with fogs only, second is fogs and led, third is led only.

Yes I am photo whoring... Haha