What Have You Done To Your 2nd Gen Tacoma Today?

Drove the sombitch and put 60 bucks of gas....

 

Is that charcoal or light gray for the main color?

 

How many people on here use a steering wheel cover? And if you do, what type?

 

I use a cheapo from Walmart.

 

Look fantastic Scott.

 

got tint done. 15 up front with 20 on the back and a sun strip

 

Check out www.wheelskins.com. Had one in the old 4runner. Super quality. Take your time on the install and you will love it.

 

we have the same truck except im an 06. I want to lift it bad but my wife would kill me if I bought something else apparrently saving for a house is more important than lifting my truck.... woman logic

 

Just did a lotek gauge pod with pro sport oil temp and pressure gauges

 

X2 on the wheelskins. Here is a write up I did on my install.

http://www.tacomaworld.com/forum/2nd-gen-tacomas/51493-installed-wheelskin-tonight.html#post916664

 

I've never seen a need to use one.

 

I use one because the original seemed to be pretty slick and it was a little worn from the PO

 

Went all led bulbs today did fog lights, head lights, dtrls, parking lights, back up lights, license plate lights, map,lights and dome light I'll get more pics at dusk

 

Very nice! I've done maps, dome and plate lights. My dome bulb always remains very slightly illuminated with doors shut, does yours?

 

Nope mine go out about 5 seconds or so after the door closes

 

Where did you get the LED's. Thanks.

 

Superbrightled.Com I got most off them the excpet my interior leds and licence plate leds I got those on ebay

 

Used it as a saw horse and built a bed. Heres the head and foot boards

 

Is that a sleeping platform for your truck bed?

 

No, its a king size foot board sitting on a king size head board i built. It will look like this tomorrow. Only a king not a queen plus a fancy foot board