32/11.5 tires on 4 cyl

Just curious if anyone on here was running 32/11.5 bfg mud terrain km2's on their 4cyl's. If you do can you post some pics thanks

 

if your considering changing your tire size that much you might wanna consider changing your gear ratio also

 

I wanted a 32/10.5 tire but couldnt find a nice mud tire or all terrain tire in that size with a 15 inch rim. Do you know of any.

 

if your gonna do 32 bump it up to 33's a lot common size.
http://www.tirerack.com/tires/TireSearchResults.jsp?width=33X&ratio=10.5&diameter=15&x=11&y=10

 

im not going to regear thats why im going with 32's. I was originally going to buy the 255/75/17 bfg mud terrian km's but they only come in 17's so now im stuck and dont know what tire to get. Thats why im looking at the mud terrain km2's 32/11.5

 

your stock size now is 245/75/16 right?

 

Yes it is.

 

if your stock rim size is 16 save the money on new rims and get the 265/75/16
http://www.tirerack.com/tires/Spec.jsp?make=BFGoodrich&model=Mud-Terrain+T/A+KM2&tirePageLocQty=

 

Wouldn't i have to get spacers though. Or will they fit on a stock rim with no rubbing? And i appreciate your help by the way.

 

you might have very little rubbing, so you might wanna check out a set of spidertrax

 

which rims do you have? i have the TRD Offroad Rims on my SR5, i run 265/75/16 BFG ATs no rubbing they are 31.6"

what r&p is in the 4cyl?

 

I have the 16" steelies painted black. But im going to get a new rim when i get tires because the paint is going to scratch off when i put new wheels on. So since im getting new rims i rather go with a 15 or 16" wheel.

 

And do you have any pictures? Post them please.

 

gotcha, well if your getting new rims then go for it.

 

why get new rims, steel wheels are stronger then alloy or alum, you can easily touch up paint on steel wheels

 

by the way the suspension on the 4 & 6 cyl. are very different unless the TSB has been done

 

I was just going to get some steel rock crawlers. Ive been doing alot of searching and seen a few 2nd gen 4cyl with 33/12.5 tires with out regearing. So right now im tending towards the 32/11.5 km2s with a 15 inch rim. Do you guys think this is a good idea?

 

and by the way I like the way the bfgs look on your stock wheels.

 

not sure how suspension came into this, what are the gears in the 4cyl ? 3.73 or 4.10 ... if it is 4.10 then you will be fine

 

they are 4:10 and the suspension gives the 6 cyl a little more clearance between the fender flare and tires