1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: OME Dakar mediums + extra leaf same as heavy's? Opinions of this suspension setup 2017 PRO FOX spring. 5100's or Pro comp 3" Lift Spacers, Air Bags, or Extra Leaf Spring Sanity check on lift kit choices

Do Chaos UCA need oil?

Discussion in 'Suspension' started by rzimm001, Sep 17, 2009.

  1. Sep 17, 2009 at 4:19 PM
    #1
    rzimm001

    #1
    rzimm001 [OP] Tearmytaco

    Joined:
    Mar 16, 2009
    Member:
    #14812
    Messages:
    1,086
    Gender:
    Male
    First Name:
    Bobby
    Wildomar
    Vehicle:
    08 PreRunner SR5 Long-Travel
    King 10" coilovers w/ resi. 3.5" over long travel kit. Factory spindles w/ ALLPRO gussets. Total Chaos tower gussets. Energy Poly cab mounts and steering rack mounts. Glassworks fenders and bedsides. Home fabbed bed cage. King 2.5x16 bypass shocks in the rear. DMZ long travel rear end. Race radio (2meter). Removed secondary carbon air filter. Exhaust dumped before the axle / no muffler. Phram fresh air cabin filter. K&N replacement filter, After market stereo, Grillcraft grill, custom fabled roof rack with 7" HID's, PRP race seats.
    Just installed my UCA's and am loving them. I was just wondering if the uniball could stand to be sprayed with any kind of lubricant. I already greased the red bushings. Now I'm just wondering about the ball. Any ideas? Thanks

    Bobby
     
    rzimm001, Sep 17, 2009
    #1
  2. Sep 17, 2009 at 4:21 PM
    #2
    chris4x4

    #2
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    NO OIL. Use a dry teflon lube.
     
    chris4x4, Sep 17, 2009
    #2
  3. Sep 17, 2009 at 4:25 PM
    #3
    rzimm001

    #3
    rzimm001 [OP] Tearmytaco

    Joined:
    Mar 16, 2009
    Member:
    #14812
    Messages:
    1,086
    Gender:
    Male
    First Name:
    Bobby
    Wildomar
    Vehicle:
    08 PreRunner SR5 Long-Travel
    King 10" coilovers w/ resi. 3.5" over long travel kit. Factory spindles w/ ALLPRO gussets. Total Chaos tower gussets. Energy Poly cab mounts and steering rack mounts. Glassworks fenders and bedsides. Home fabbed bed cage. King 2.5x16 bypass shocks in the rear. DMZ long travel rear end. Race radio (2meter). Removed secondary carbon air filter. Exhaust dumped before the axle / no muffler. Phram fresh air cabin filter. K&N replacement filter, After market stereo, Grillcraft grill, custom fabled roof rack with 7" HID's, PRP race seats.

    Hmm... Teflon. Is that easily acquired at my local hardware store? Is it like a powder or what?

    Bobby
     
    rzimm001, Sep 17, 2009
    #3
  4. Sep 17, 2009 at 4:27 PM
    #4
    chris4x4

    #4
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Try and find a Spray Teflon lube. Local Hardware store should carry it. You should only have to apray them once a year or so.
     
    chris4x4, Sep 17, 2009
    #4
  5. Sep 17, 2009 at 4:31 PM
    #5
    rzimm001

    #5
    rzimm001 [OP] Tearmytaco

    Joined:
    Mar 16, 2009
    Member:
    #14812
    Messages:
    1,086
    Gender:
    Male
    First Name:
    Bobby
    Wildomar
    Vehicle:
    08 PreRunner SR5 Long-Travel
    King 10" coilovers w/ resi. 3.5" over long travel kit. Factory spindles w/ ALLPRO gussets. Total Chaos tower gussets. Energy Poly cab mounts and steering rack mounts. Glassworks fenders and bedsides. Home fabbed bed cage. King 2.5x16 bypass shocks in the rear. DMZ long travel rear end. Race radio (2meter). Removed secondary carbon air filter. Exhaust dumped before the axle / no muffler. Phram fresh air cabin filter. K&N replacement filter, After market stereo, Grillcraft grill, custom fabled roof rack with 7" HID's, PRP race seats.

    Thanks Chris, sounds good. One more question since your online. I noticed when I do my serious offroading, occasionally it results in the entire steering wheel being off center (Turned about 10% to either the right or left) although the handling feels solid. The alignment shop always get it back to being perfect again but the guy said tacomas have a weak bushing in the rack and pinion that can move right or left somewhat. Is there any practical upgrade for this problem or am I just asking too much of the taco?

    Thank you
     
    rzimm001, Sep 17, 2009
    #5
  6. Sep 17, 2009 at 5:19 PM
    #6
    chris4x4

    #6
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Energy suspension has some Poly bushings, but Im not sure if they are out for the sencond gens yet. I dont know why your alignment has been knocked off center. I have beaten on mine pretty good, and its still straight. Im wondering if the alignment shop isnt setting the cam adjusters tight enough.
     
    chris4x4, Sep 17, 2009
    #6
  7. Sep 17, 2009 at 7:20 PM
    #7
    rzimm001

    #7
    rzimm001 [OP] Tearmytaco

    Joined:
    Mar 16, 2009
    Member:
    #14812
    Messages:
    1,086
    Gender:
    Male
    First Name:
    Bobby
    Wildomar
    Vehicle:
    08 PreRunner SR5 Long-Travel
    King 10" coilovers w/ resi. 3.5" over long travel kit. Factory spindles w/ ALLPRO gussets. Total Chaos tower gussets. Energy Poly cab mounts and steering rack mounts. Glassworks fenders and bedsides. Home fabbed bed cage. King 2.5x16 bypass shocks in the rear. DMZ long travel rear end. Race radio (2meter). Removed secondary carbon air filter. Exhaust dumped before the axle / no muffler. Phram fresh air cabin filter. K&N replacement filter, After market stereo, Grillcraft grill, custom fabled roof rack with 7" HID's, PRP race seats.

    What should I torque them to? I'd be curious if the aren't torqued down tight enough. Anything else I can tighten down?
     
    rzimm001, Sep 17, 2009
    #7
  8. Sep 17, 2009 at 7:35 PM
    #8
    chris4x4

    #8
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    The Uniball gets torqued to 95# or so. Not to exceed 100#. UCA bolt is 83# IIRC.
     
    chris4x4, Sep 17, 2009
    #8
  9. Sep 17, 2009 at 8:18 PM
    #9
    rzimm001

    #9
    rzimm001 [OP] Tearmytaco

    Joined:
    Mar 16, 2009
    Member:
    #14812
    Messages:
    1,086
    Gender:
    Male
    First Name:
    Bobby
    Wildomar
    Vehicle:
    08 PreRunner SR5 Long-Travel
    King 10" coilovers w/ resi. 3.5" over long travel kit. Factory spindles w/ ALLPRO gussets. Total Chaos tower gussets. Energy Poly cab mounts and steering rack mounts. Glassworks fenders and bedsides. Home fabbed bed cage. King 2.5x16 bypass shocks in the rear. DMZ long travel rear end. Race radio (2meter). Removed secondary carbon air filter. Exhaust dumped before the axle / no muffler. Phram fresh air cabin filter. K&N replacement filter, After market stereo, Grillcraft grill, custom fabled roof rack with 7" HID's, PRP race seats.
    What about the camber adjusters you were talking about. How tight should those be?
     
    rzimm001, Sep 17, 2009
    #9
  10. Sep 17, 2009 at 8:20 PM
    #10
    chris4x4

    #10
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Not sure. I think about 80 to 100#...The alignment shop shoud torque those though.
     
    chris4x4, Sep 17, 2009
    #10

Products Discussed in

Mobil 1 104361 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)
$29.67
VIAIR 88P Portable Compressor Kit (12V, 120 Psi, Forup to 33" Tires)
$90.01
Moog 81102 Coil Spring Set
$165.95
ENERGY SUSPN Energy Suspension 8.10106G Rack & Pinnion Bushing Set
$64.78
Lexus Genuine Factory 2 EMBLEM NUTS 90183-06044
$8.99
Genuine Toyota 4Runner TRD PRO Matte Black Wheels PTR20-35110-BK (Fits: 4Runner - Tacoma - FJ Cruiser) (4)
$1,024.99
Philips 9003 MotoVision Motorcycle and Powersport Replacement Headlight Bulb, 1 Pack
$22.10
MOOG K80827 Front Lower Suspension Ball Joint for Toyota Tacoma
$23.43
Detroit Axle - 2 Front Lower Ball Joints for 2005-2019 Toyota Tacoma Lower Ball Joint 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Replacement
$26.72
3M VHB 100x200mm~ (4" X8") Double Sided Foam Adhesive Sheet Tape 5952 Automotive Mounting Industrial Grade Very High Bond 5952 (1 Sheets 100x200mm)
$7.89
Toyota Brake Pad - PTR09-89111
$134.80
MOOG K90258 Front Left Lower Suspension Ball Joint for Toyota Tacoma
$48.78
OMT Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
$48.99
MOOG K200119 Suspension Control Arm Bushing Kit for Toyota Tacoma
$24.28
CRC 03007 3-36 16oz Multi-Purpose Lubricant and Corrosion Inhibitor Spray Bottle
$24.62
APDTY 035181 Rear Leaf Spring Insert 20870046
$24.78
10" Vise Grips Locking Plier Sheet Metal Clamp Tool
$23.99
Seaboard High Density Polyethylene Sheet, Matte Finish, 1/2" Thick, 12" Length x 24" Width, Black
$41.23
ARB EL46XL EXTRA LEAF SPRING
$44.00
Daystar, Toyota FJ Cruiser 1.5" Rear Lift Kit, fits 2007 to 2014 2/4WD, all transmissions, all cabs KT09127BK, Black
$45.16
Orion Motor Tech OMT 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)
$44.09
Supreme Suspensions - Heavy Duty Coil Spring Compressor Tool with Clamps - Can Cooler Included with Purchase
$45.00
Handor Coil Spring Compressor Tool Automotive 2 PCS Ultra Rugged Strut Spring Compressor Tool, Heavy Duty Macpherson Strut Spring Compressor Set
$37.99
KYB SM5184 - Strut mount
$37.49
Front Suspension Lift Kit - 1.5" Lift - Compatible with 2005-2021 Toyota Tacoma (6-Lug), 2003-2021 4Runner, 2007-2014 FJ Cruiser (4WD) - Leveling Kit Strut Upper Top Aluminum Spacers Accessories
$39.78
Gabriel G63494 White Ultra Truck Shock, 1 Pack
$39.78
OEMTOOLS 25550 MacPherson 10.75" Strut Spring Compressor, Set of 2 Universal Spring Compressor Tools, 9.75" Maximum Safe Opening
$39.49
Supreme Suspensions - 1" Rear Lift Blocks for Toyota Tacoma/Tundra/IFS Pickup/IFS T100 2WD/4WD - High-Strength Steel Rear Lift Blocks 9/16th Pin - Can Cooler Included with Purchase
$39.95
Prothane 19-1751 Super Grease Tube - 14 oz.
$50.62
FK Bearings WSSX16T Spherical Bearing with Teflon, 1" (1-3/8 Wide), 1 Pack
$54.99
Icon Billet Aluminum Sway Bar Relocation Blocks Kit 611030
$51.45
Lincoln 1134 Extra Heavy Duty Pistol Grip Grease Gun, 6" Rigid Extension, Dual Lip Follower, Variable Stroke Mechanism, 18 Whip Hose with Coupler
$51.30
Daystar KU09017BK 3" Tall x 4-1/2" Long x 2-1/2" Wide Bump Stop
$54.99
Macnaught K32 Pistol Grip Grease Gun with 10 Year Performance Warranty - with NPT Whip (K32-01)
$57.00
Powerbuilt 3 Ton, Bottle Jack and Jack Stands in One, 6000 Pound All-in-One Car Lift, Heavy Duty Vehicle Unijack, 640912
$59.99
ACDelco Professional 45D2266 Front Passenger Side Lower Suspension Ball Joint Assembly
$59.22
Shankly Spring Compressor Tool - Heavy Duty Build, Ultra-Rugged Coil Spring Compressor Tool or Strut Spring Compressor Strong and Durable ATV Spring Compressor Tool
$59.99
2-1/2" Wide MEGA-DUTY Axle LEAF SPRING REBOUND CLAMPS - SET OF FOUR (4) (OFF-ROAD VEHICLES)
$59.99
ARB Bush Kit OME Shackle Tacoma (OMESB121)
$39.81
Milton (S-3101) Pistol Grease Gun - High Pressure, High Volume
$38.65
ICON 198000 Spanner Wrench for Coil-Over Shock
$43.94
MOOG K100127 Alignment Caster / Camber Kit for Toyota Tacoma
$40.70
To Top