Side Rail Cap System by KB Voodoo - NOW MADE FROM ALUMINUM

subd

 

We cut 19 sets on the plasma tonight.

 

subd for pics

 

Good question!!

Yes, there will be 1/16" thick water resistant double sided tape on top of the rail to act as a barrier between the cap and the truck's sheet metal.

 

I like these alot! Would you consider doing a one off for Flat top fiberglass fenders?

 

I would need some detailed dimensions of the fenders.

 

Long bed version please.

 

So for your next product, please invent something that will let me anchor something like a gas can or 5 gallon bucket or milk crate or 20 lb propane tank in the front corner of the bed. Or maybe rear corner. The factory rail system is too high to do this. Thanks

 

Vikes, how are you meaning to anchor it? With tie downs? Is there nothing you can do with the bed d rings and the rail system combined?

 

Last night I started design on a modular cargo basket system that will suspend from my crossbars and drop down into the bed.

It will be sold in as many pieces as people need, kind of a' la carte if you will.

If you need it to span all the way across the bed, it can. If you only need it to span halfway across the bed, it can.

 

Can you make a cross bar system that will be elevated out of the bed to hold a basket?

 

These are the crossbars that I already make: http://www.tacomaworld.com/forum/2nd-gen-tacoma-marketplace/324002-bed-brackets-sale-price.html

These are the heavy duty cross bars that are in pre-production: http://www.tacomaworld.com/forum/2nd-gen-tacomas/348896-heavy-duty-bed-brackets-kb-voodoo.html

This is my cargo basket that is in pre-production: http://www.tacomaworld.com/forum/2nd-gen-tacomas/348482-powder-coated-cargo-basket-kb-voodoo.html

 

I've seen those but I mean like a bar that is a couple inches higher than the bed

 

The heavy duty cross bar sits a couple inches higher than the bed.

 

One question...With these side rail caps being 1/8" thick and bolting between the bed sides and the cleat rail, this is going to make 1/4" less between the cleat rails. Is this going to effect the use of your cross bars??

 

Good question!!

The holes in the cross bars are slotted in the long direction, so we should be good to go.

I will make double sure when I get a complete set of side rail caps on my truck though.

 

Thanks. Looks like another great product.

 

So then those with caps and tonneaus that take into account the factory 3/8" drop between the sides and bed front may have issues with only a 1/4" drop now?

 

Yes, that sounds about right.

 

You ever think about making the bed brackets out of the 11 gauge?