What Have You Done To Your 2nd Gen Tacoma Today?

Grinch!

 

no


There's these

 

What LED mounts did you used?

 

http://www.ebay.com/itm/10-LED-HOLDER-RETAINERS-PANEL-MOUNTING-5mm-LOCKS-USA-/321590084167?pt=LH_DefaultDomain_0&hash=item4ae0434247

Buy your LED shit from That guy ^^ he has good stuff. Great seller.

 

And the connectors?

 

wha?


All you need are those little LED holders and these: http://www.ebay.com/itm/10-pcs-LED-...133?pt=LH_DefaultDomain_0&hash=item4ad31c066d

 

I mean like the plug, I though you used the same LEDs as the parking lights lol.

 

OH...I C ! ! !

No they are tied into my remote control unit that runs the underglow kit.

 

Finally added relays to my seat heaters so they are ignition powered instead of being always hot....last think I need is to forget and burn the car down

 

Where di you got that cable wrap?

 

Look on Amazon. 'Braided Cable Loom' Just pick your thickness and length and color. Use either a soldering iron, hot knife, or lighter to seal the ends when cut. If you heat shrink the ends, use a low heat heat gun or lighter. Just make sure you are keeping an eye on the loom when doing it. It will melt.

 

What'd you end up doin for the turn signal since you blacked out the whole reflector?

 

Do you know what thickness I need for 0 ga cable?

 

These, they are ridiculous bright.

 

^I have them in white 1400 lumens

 

Grillcraft and some hellas

 

Just noticed you have the front door windows at 5% also. Not really safe at all, please give due caution when approaching crosswalks at night and other low light, you will have a very difficult time seeing a pedestrian to your right or left about to walk in front of you as your light turns green.

5% up front is not a great idea, IMO. And out of state plates don't make a difference to CA tint laws. If you're a resident of CA you're just violating another law (in addition to unsafe tint on front windows) by not registering your vehicle with CA DMV. You aren't safe from tint tickets, you'll just get written up twice.

 

I want white but I hate these bastards. I marked the sides of each bulb so when I take them in and out they don't blow my fuses

I have the red rear brakes of those and they worked for a couple weeks then BOOM.....blows fuses no matter what I do with them

At least with the fronts it doesn't blow anything but the blinker. Easy fix.

 

I would use 3/8" 0r 1/2"

 

Ordered some Duratracs! 265/75/16. Hopefully getting them mounted tomorrow.