NYCO's '06 Boosted Blue Betty

gotta get an early start on '15 mods so I can get everything done by end of April

 

If everyone around here already has their XMAS lights up you can start calling all these mods 2015 mods

 

^^^ Here's Chux's setup. I'm going with the Iggy switch plate and adding my own twist when it gets here

 

they are in the line of mods that need to be finished by end of April when they will be fully tested... so i call them '15 mods

bout the only thing that will be in and done before YE is a new bump setup in the rear...that should be in this weekend...

the 2way air system will be working its way in over the next few weeks, but most likely will be tweaked up until April before i'm happy with it...

roof rack and light setup will be a December or later mod with tweaking going through the spring as well..

and the switch revamping will be basically done by year end but not finalized until april...

 

i think i'm leaning this direction...might chop it up and take out one of the cig ports and squeeze in a OTRATTW 4, 5 or 6 panel...

 

Whatcha going with fer bumps?

 

Timbren with the All-Pro flip kit Low Range Off Road is coming out with a new bump stop to go with their Flip plate as well...so it may rotate in the future to try some different options out... http://www.lowrangeoffroad.com/yota...lt-flip-plate-kit-bumpstop-style-tsp-bsp.html

 

my current bump setup is too harsh on my frame being half mount half bump...the timbren is all bump which my frame will thank me for

 

Your passengers will thank you, your gear will thank you, your axle will thank you...

 

I am running that 4 1/2" bumpstop from the frame. I like it...That LROR kit just made it to my short list now...Thanks BOB!

 

yea LROR is onto something with that kit...they are working to develop a new bump as well that will be height adjustable through cutting while still maintaining it's strength and absorption..

 

Check out these guys too, OEM looking http://www.aironboard.com/online/toyota-replacement/tacoma-2005-2011.html

edit - switch is smaller in real life.

 

I would just need the new top plate since I already have the bolts and exact bumpstop they use. Would be nice to have my bumps back on the axle instead of the frame...Plus they don't strike the plate 100% dead on....Black Friday sale list for that plate.

 

there ya go... yea the plate has a center hole for that mounting option as well as two side holes for that style bump mount... like i said, they definitely are on to something with that design..

 

Jesus Christ those are expensive!

 

damn i was hoping for a switch i could high five

 

Bummer! I wanted a "Winch Power" switch the size of my center console so I could not miss it.

 

so they are another company who makes "bunny burner" switches....WTF is a bunny burner light?

fogs?

i know in S. UT there's desert hares who love to run out in front of you on the trail...

 

probably fogs.. idk. we don't have bunnies here, just deer.

 

Yes, but still cheaper than the OEM Toyo ones.

I would drop kick it to turn on. I think I will go with these for my next set and ditch my current OTTRAWs.