1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

install coilovers

Discussion in '1st Gen. Tacomas (1995-2004)' started by socal19, Sep 19, 2009.

  1. Sep 19, 2009 at 2:09 PM
    #1
    socal19

    socal19 [OP] TACOMA03

    Joined:
    Feb 16, 2009
    Member:
    #13694
    Messages:
    363
    Gender:
    Male
    California
    Vehicle:
    03 tacoma pre runner
    2.5" Front spacers, 16inch wheelers steel wheels on 265-75-R16 BFG All Terrain, N-FAB prerunner bar, Flowmaster Exhaust
    Hey guys I was wondering I'm going to get the toytec ultimate lift so coilovers.....is it easy to install them yourself or should I have someone else put them on. Has anyone put them on and everything was okay after that.
     
  2. Sep 19, 2009 at 2:13 PM
    #2
    Trdman98

    Trdman98 Member

    Joined:
    Aug 27, 2009
    Member:
    #21894
    Messages:
    17
    Gender:
    Male
    Vehicle:
    98 tacoma 4x4 6"
    3" body, Toytec Coilovers, Dakars, Bilsteins, 33"BFGs, Intake, Exhaust
    great kit and very easy install
     
  3. Sep 19, 2009 at 2:15 PM
    #3
    Bearskill

    Bearskill Well-Known Member

    Joined:
    Sep 7, 2008
    Member:
    #9064
    Messages:
    791
    Gender:
    Male
    Sac
    Vehicle:
    06 Access cab PreRunner Sport
    FlowMaster 40 duals out the back, T-Rex grill, Color matched TRD Nerf bars, Icon coilovers set at 2'', 2.75" OME Dakars spring packs, OME Nitro-Charger extended rear shocks, Carrier bearing drop kit, Wheeler's Extended break Lines, Total Chaos UCAs, Mojave Teflons and 31 1/2" Toyo Open Country A/Ts, Pioneer single din unit, Yakima roof rack, Malone roof basket with X2 KC 130w long range Slimmlights mounted to it, Garmin 255w nav, Fire bottle mod, Air Force standard First Aid kit mod, Hidden Muchette mod (don't ask), and 1 huge OCD about my truck.
    Me and a buddy put my Icons on our selves. Easy stuff, just need the tools and COIL COMPRESSOR! Run by a Schucks or Kragan. They will let you barrow a coil compressor. You put a deposit down, but then get it all back when you return it. Best of luck!!!:D
     
  4. Sep 19, 2009 at 2:20 PM
    #4
    socal19

    socal19 [OP] TACOMA03

    Joined:
    Feb 16, 2009
    Member:
    #13694
    Messages:
    363
    Gender:
    Male
    California
    Vehicle:
    03 tacoma pre runner
    2.5" Front spacers, 16inch wheelers steel wheels on 265-75-R16 BFG All Terrain, N-FAB prerunner bar, Flowmaster Exhaust
    Okay so it should be easy right I can get all the tools and jack stands I think I saw a link on the suspension part that chris 4x4 put up on how to take off the coils..........isn't it just to unbolt 3 bolts up top and remove the whole coil out and just put the new ones on the same way........and how much do I torque them too
     
  5. Sep 19, 2009 at 3:25 PM
    #5
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,530
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    I sent you a PM with all the info needed. :)
     

Products Discussed in

To Top